Home » Fire-Lite Gentex AVS44 Synchronization Module
File preview
Click the button below to download immediately for free
Show text preview
July 28, 1998 AVS44 Control Module the GOT/GOS Series Horn & Horn/Strobe Audio/Visual Devices Vol. XII Fire Gentex AVS44 Synchronization Control Module is to provide an easy way to synchronize multiple as well as strobe light flashes using only two wires in rare instances where a synchronized flash is required. control module has the ability to synchronize mul- horn signals with: a Code 3 temporal pattern at 800 or 2400 Hz; the 800/1000 Hz alternating tone; the chime and the ability to silence the horn while allowing the to continue flashing. incorporating the control module as shown in the wiring (page 2), the control module will control power to horns to produce synchronized operation. When using strobes or horn/strobes in parallel mode, synchro- may also be attained without using a control mod- if the fire alarm control panel is capable of providing power with a minimum power-off time of 10 mS and maximum power-off time of 20 mS and with a repetition of 1 second (see figure 2, page 2). In parallel mode, horn cannot be silenced while maintaining strobe op- Option to silence the horn while strobes continue to flash. Synchronize horn and strobe using only two wires. Operates GOS (cid:147)Z(cid:148) horn/strobe. Easy to install. INFORMATION Module is rated for 3 Amps at 24 VDC. Synchronizes to 1 Hz flash rate. Dimensions: 3.321″ (84.3534 mm) high x 2.896″ mm) wide x 1.190″ (30.2260 mm) deep. document is not intended to be used for installation purposes. We try to keep our information up-to-date and accurate. We cannot cover all specific applications or all requirements. All specifications are subject to change without notice. For information, contact Fire(cid:149)Lite. Phone: (203) 484-7161 FAX: (203) 484-7118 Clintonville Road, Northford, Connecticut 06472 and Manufacturing System Certified to Standard ISO-9001 in the U.S.A. (cid:151) Page 1 of 2 DIAGRAMS NOTE: Do NOT loop wires under terminals. Use in-and-out wiring method. FIGURE 1: For INDEPENDENT (Z-Series) strobes and horn. FIGURE 2: For synchronized temporal horn ONLY, PARALLEL horn/strobe operation. 1 2 ON JUMPERS: using the AVS44 control module, J5 and on the GOS must be in the top position. jumpers are in the top position when from the factory. DIAGRAM AT RIGHT. 3 2 of 2 (cid:151) DF-51933
July 28, 1998 AVS44 Control Module the GOT/GOS Series Horn & Horn/Strobe Audio/Visual Devices Vol. XII Fire Gentex AVS44 Synchronization Control Module is to provide an easy way to synchronize multiple as well as strobe light flashes using only two wires in rare instances where a synchronized flash is required. control module has the ability to synchronize mul- horn signals with: a Code 3 temporal pattern at 800 or 2400 Hz; the 800/1000 Hz alternating tone; the chime and the ability to silence the horn while allowing the to continue flashing. incorporating the control module as shown in the wiring (page 2), the control module will control power to horns to produce synchronized operation. When using strobes or horn/strobes in parallel mode, synchro- may also be attained without using a control mod- if the fire alarm control panel is capable of providing power with a minimum power-off time of 10 mS and maximum power-off time of 20 mS and with a repetition of 1 second (see figure 2, page 2). In parallel mode, horn cannot be silenced while maintaining strobe op- Option to silence the horn while strobes continue to flash. Synchronize horn and strobe using only two wires. Operates GOS (cid:147)Z(cid:148) horn/strobe. Easy to install. INFORMATION Module is rated for 3 Amps at 24 VDC. Synchronizes to 1 Hz flash rate. Dimensions: 3.321″ (84.3534 mm) high x 2.896″ mm) wide x 1.190″ (30.2260 mm) deep. document is not intended to be used for installation purposes. We try to keep our information up-to-date and accurate. We cannot cover all specific applications or all requirements. All specifications are subject to change without notice. For information, contact Fire(cid:149)Lite. Phone: (203) 484-7161 FAX: (203) 484-7118 Clintonville Road, Northford, Connecticut 06472 and Manufacturing System Certified to Standard ISO-9001 in the U.S.A. (cid:151) Page 1 of 2 DIAGRAMS NOTE: Do NOT loop wires under terminals. Use in-and-out wiring method. FIGURE 1: For INDEPENDENT (Z-Series) strobes and horn. FIGURE 2: For synchronized temporal horn ONLY, PARALLEL horn/strobe operation. 1 2 ON JUMPERS: using the AVS44 control module, J5 and on the GOS must be in the top position. jumpers are in the top position when from the factory. DIAGRAM AT RIGHT. 3 2 of 2 (cid:151) DF-51933