Home » Fire-Lite Gentex GMH Horn-Strobe
File preview
Click the button below to download immediately for free
Show text preview
November 30, 1998 GMH/GMS Series Electro-Mechanical & Horn/Strobes Audio/Visual Devices Vol. VII with: NFPA 72 ADA 4.28.3 30/75, cd) S3406 (GMH24R, Fire of Chicago FEATURES Low-frequency penetrating sound output. Low operating current. Screw terminals, separate in/out field wiring (12 AWG/ mm Textured plastic high-impact faceplate. Separate horn and strobe functions (jumper wires). Variety of standard mounting options. Supplied with beauty plugs to accommodate mounting Strobe maintains constant flash rate regardless of input Flush mounting. Outdoor use listed (GMH and WGMS). 15/75, 30/75 and 110 candela strobe options meet or the requirements of ADA 4.28.3. UL 464/UL1971 listed for fire protection service/signal for impaired. No mechanical contacts. Flash rate 1 Hz (60 flashes per minute). Gentex 4″ low-frequency electromechanical horn/ series meets and exceeds code requirements for fire alarm systems for the hearing impaired. GMH/GMS Series are quality electromechanical sig- appliances that offer both dependable evacuation and visual alarms by means of simple screw- wiring connections. GMH/GMS Series is designed to be used for both new and retrofit projects. With the Gentex trim the GMH/GMS can be mounted to a double-gang box in retrofit or new construction. devices are suited for areas having high ambi- noise levels where higher audible output is required. Z synchronized strobes require the use of the ZMS4 GMH/GMS appliances are UL 464 and UL 1971 listed use with fire protective signaling systems. GMH/GMS warranted for two years from the date of purchase. & ENGINEERS(cid:146) alarm signal shall be Gentex model GMH or GMS or equivalent, and shall be listed by Underwriters per UL 464, and when combined with the option, the strobe shall also be listed per UL 1971. notification appliance shall also be listed with the State Fire Marshal (CSFM) and MEA (NYC). notification appliance shall produce a peak sound of 105 dBA or greater as measured in an anechoic visual signal shall have a flash rate of 1 Hz regardless input voltage. notification appliance shall be provided with screw for in-and-out field wiring and the strobe shall be of operating independently after the audible has silenced. notification appliance shall be capable of mounting to 4″ (10.16 cm) square backbox and a two-gang switch with the Gentex trim ring. document is not intended to be used for installation purposes. We try to keep our information up-to-date and accurate. We cannot cover all specific applications or all requirements. All specifications are subject to change without notice. For information, contact Fire(cid:149)Lite. Phone: (203) 484-7161 FAX: (203) 484-7118 Fire-Lite Place, Northford, Connecticut 06472 and Manufacturing System Certified to Standard ISO-9001 in the U.S.A. (cid:151) Page 1 of 2 *INRUSH CURRENT: for less than 0.2 micro
November 30, 1998 GMH/GMS Series Electro-Mechanical & Horn/Strobes Audio/Visual Devices Vol. VII with: NFPA 72 ADA 4.28.3 30/75, cd) S3406 (GMH24R, Fire of Chicago FEATURES Low-frequency penetrating sound output. Low operating current. Screw terminals, separate in/out field wiring (12 AWG/ mm Textured plastic high-impact faceplate. Separate horn and strobe functions (jumper wires). Variety of standard mounting options. Supplied with beauty plugs to accommodate mounting Strobe maintains constant flash rate regardless of input Flush mounting. Outdoor use listed (GMH and WGMS). 15/75, 30/75 and 110 candela strobe options meet or the requirements of ADA 4.28.3. UL 464/UL1971 listed for fire protection service/signal for impaired. No mechanical contacts. Flash rate 1 Hz (60 flashes per minute). Gentex 4″ low-frequency electromechanical horn/ series meets and exceeds code requirements for fire alarm systems for the hearing impaired. GMH/GMS Series are quality electromechanical sig- appliances that offer both dependable evacuation and visual alarms by means of simple screw- wiring connections. GMH/GMS Series is designed to be used for both new and retrofit projects. With the Gentex trim the GMH/GMS can be mounted to a double-gang box in retrofit or new construction. devices are suited for areas having high ambi- noise levels where higher audible output is required. Z synchronized strobes require the use of the ZMS4 GMH/GMS appliances are UL 464 and UL 1971 listed use with fire protective signaling systems. GMH/GMS warranted for two years from the date of purchase. & ENGINEERS(cid:146) alarm signal shall be Gentex model GMH or GMS or equivalent, and shall be listed by Underwriters per UL 464, and when combined with the option, the strobe shall also be listed per UL 1971. notification appliance shall also be listed with the State Fire Marshal (CSFM) and MEA (NYC). notification appliance shall produce a peak sound of 105 dBA or greater as measured in an anechoic visual signal shall have a flash rate of 1 Hz regardless input voltage. notification appliance shall be provided with screw for in-and-out field wiring and the strobe shall be of operating independently after the audible has silenced. notification appliance shall be capable of mounting to 4″ (10.16 cm) square backbox and a two-gang switch with the Gentex trim ring. document is not intended to be used for installation purposes. We try to keep our information up-to-date and accurate. We cannot cover all specific applications or all requirements. All specifications are subject to change without notice. For information, contact Fire(cid:149)Lite. Phone: (203) 484-7161 FAX: (203) 484-7118 Fire-Lite Place, Northford, Connecticut 06472 and Manufacturing System Certified to Standard ISO-9001 in the U.S.A. (cid:151) Page 1 of 2 *INRUSH CURRENT: for less than 0.2 micro