MRP-2001C – Preaction Control Panel MRP-2001C is a six-zone FACP for single and dual haz- deluge and preaction applications. The MRP-2001C pro- reliable fire detection, signaling and protection for industrial and institutional buildings requiring releasing. The MRP-2001C is compatible with Sensor i3 detectors which are conventional smoke that can transmit a maintenance trouble signal to the indicating the need for cleaning and a supervisory signal when the ambient temperature falls below the rating of approximately 7.22 In addition, the control is compatible with conventional input devices such as smoke detectors, four-wire smoke detectors, pull sta- waterflow devices, tamper switches and other normally- contact devices. Refer to the Fire Device Compati- Document for a complete listing of compatible devices. outputs are programmable as NACs (Notification Appli- Circuits) or releasing circuits. Three programmable relays (factory programmed for Alarm, Trouble and and 24 VDC special application resettable and power outputs are also included on the main board. The MRP-2001C supervises all wiring, AC volt- battery charger and battery level. of a compatible smoke detector or any normally- fire alarm initiating device will activate audible and visual devices, illuminate an indicator, display alarm infor- on the panel LCD, sound the piezo sounder at the activate the FACP alarm relay and operate an optional used to notify a remote station or initiate an auxiliary function. Listed to Standard ULC-S527-11. FM Approved. Designed for sprinkler standards NFPA 13, 15, and 16. Dual hazard operation. Adjustable waterflow discharge timer and two soak timers. Cross-zone (double-interlock) capability. Six programmable Style B (Class B) IDCs (Initiating Device System Sensor i3 series detectors compatible. Four programmable Style Y (Class B) output circuits – (spe- application power). Strobe Synchronization: System Sensor Wheelock Gentex Faraday Amseco Three programmable Form-C relays. 7.0 amps total 24 VDC output current. Resettable and non-resettable output power. Built-in Programmer. DF-60441:B2 Control Panels ANN-BUS for connection to optional devices (one or 2 of of the following): ANN-80C Remote LCD Indicator ANN-I/O LED Driver ANN-S/PG Printer Module ANN-RLY Relay Module ANN-LED Annunciator Module (built-in) 80-character LCD display (backlit). Real-time clock/calendar with daylight savings time control. History log with 256 event storage. Piezo sounder for alarm, trouble, and supervisory. 24 volt DC operation. Low AC voltage sense. Outputs Programmable for: Releasing circuits or NACS NACs programmable for: Silence Inhibit Strobe Synchronization Selective Silence (horn-strobe mute) Temporal or Steady Signal Silenceable or Non-silenceable Release Stage Sounder Disable/Enable control per input zone and output zone. Extensive transient protection. Automatic battery charger with charger supervision. Supplied Dress Panel DP-51050 (red). Optional Trim Ring TR-CE (red) for semi-flush mounting the 8/31/2016 Page 1 of 4 Optional CAC-5X Class A Converter Module for Outputs IDCs. Optional 4XTMF Municipal Box Transmitter Module. Optional Digital Alarm Communicators 411UD, 411UDAC). Optional ANN-SEC card for a secondary ANN-BUS. AND SOFTWARE: Custom English labels (per point) may be manually entered selected from an internal library file. Three programmable Form-C relay outputs. Pre-programmed and custom application templates. Continuous fire protection during online programming at the panel.