Fire-Lite MS-9050UD

DF-52418:A (cid:129) A1-60 Alarm Control Panel DACT Fire(cid:129)Lite MS-9050UD is a Fire Alarm Control Panel and Digital Alarm Communicator/Transmitter (DACT) into one circuit board. This compact, cost effective, addressable control panel supports up to 50 addres- devices of any type of detectors and modules. With an list of powerful features, the MS-9050UD programs like Fire(cid:129)Lite larger products, yet fits into applications pre- served only by conventional panels. MS-9050UD integral DACT transmits system status troubles, AC loss, etc.) to a Central Station via the switched telephone network. power supply and all electronics are contained on a single board supported on a new quick install chassis and in a metal cabinet. Available accessories include annunciators and reverse polarity/city box transmitter. Listed to UL Standard 864, 9th edition. Auto-program (learn mode) reduces two devices set to the same address. On-board DACT. 20 software zones. Two independently programmable Style Z (Class A) or Y (Class B) NAC circuits. Selectable strobe synchronization for System Sensor, and Gentex devices. Remote Acknowledge, Silence, Reset and Drill via address- monitor modules. Two programmable relays and one fixed trouble relay. 80-character LCD display with backlighting. Real-time clock/calendar with automatic daylight savings History file with 500 event capacity. Detector sensitivity test capability (NFPA 72 compliant). Maintenance alert warns when smoke detector dust accu- is excessive. One person audible or silent walk test with walk-test log and Point trouble identification. Waterflow (nonsilenceable) selection per monitor point. System alarm verification selection per detector point. PAS (Positive Alarm Sequenc e) and Pre-signal per point 72 compliant). Up to eight ANN-BUS annunciators. COMMUNICATION LOOP: Single addressable SLC loop which meets NFPA Style 4, 6 panel. 7 requirements. 50 addressable device capacity (any combination of detectors and modules). Compatible with Fire(cid:129)Lite addressable devices (refer to Wiring Manual). APPLIANCE CIRCUITS (NACS): Two independently programmable output circuits. Circuits be configured for the following outputs: Style Y (Class B) Style Z (Class A) Door Holder Service Aux Power Source Silence Inhibit and Autosilence timer options. Continuous, March Time, Temporal or California code for circuit board NACs with two-stage capability. Selectable strobe synchronization per NAC. 2.5 A total power for NACs. Maximum or total 24VDC system power shared between NAC circuits and the ANN-BUS is 2.7 A. AND SOFTWARE: Autoprogram (learn mode) reduces installation time. Custom English labels (per point) may be manually entered selected from an internal library file. Two programmable Form-C relay outputs. 20 software zones. Continuous fire protection during online programming at the Program Check automatically catches common errors not to any zone or input point. 04/05/07 Page 1 of 4 Intelligent beam smoke detector with integral test. Photoelectric low-flow duct smoke detector. Photoelectric low-flow duct smoke detector with option. Addressable Monitor Module for one zone of nor- dry-contact initiating devices. Mounts in standard (10.16 cm.) box. Includes plastic cover plate and end-of- resistor. Module may be configured for either a Style B B) or Style D (Class A) IDC. Dual Monitor Module. Same as MMF-300 except it two Style B (Class B) only IDCs. Miniature version of MMF-300. Excludes LED and D option. Connects with wire pigtails. May mount in backbox. Similar to MMF-300, but may monitor up to 20 con- two-wire detectors. Requires resettable