Home » Fire-Lite PRN-6-Operators-Manual-English
File preview
Click the button below to download immediately for free
Show text preview
Operator Manual d per l de servicio Printer matricielle a Matrice matricial Information equipment generates and uses radio frequency energy and if not and used properly, that is, in accordance with the manufacturer may cause interference in radio and television reception. It been type tested and found to comply with the limits for class B devices in accordance with the specification in subpart J of part of FCC rules, which are designed to provide reasonable protection such interference in a residential installation. However, there is no that interference will not occur in a partial installation. If this does cause interference to radio or television reception, which be determined by turning the equipment off and on, the user is to try to correct the interference by one or more of the following the receiving antenna, the peripheral away from the receiver, the peripheral away from the receiver the peripheral into a different outlet, so that the peripheral and are on different branch circuits necessary, the user should consult the dealer or an experienced technician for additional suggestions. The user may find following booklet, prepared by the Federal Communications Com- helpful: to Identify and Resolve Radio-TV Interference booklet is available from the U.S. Government Printing Office, Wash- DC 20402 Stock No. 004.000.00345.4. To comply with FCC regulations on electromagnetic inter- for a class B computing device, the printer cable must be shielded. assure compliance with FCC regulations for a computing device, use shielded interface cable with a metal shell connector. The use of cables properly shielded may result in violating FCC regulations. digital apparatus does not exceed the class B limits for radio noise from digital apparatus as set out in the radio interference of the Canadian department of communications. unit complies with DOC standard C108.8-M 1983 Le pr appareil num n pas de bruits d les limites applicables aux appareils de la classe B prescrites dans le r sur le brouillage par le minst des communications du Canada. device fulfils the European standards requirements by complying with the Directive of the Commission May 3, 1989 (89/336/EEC) relating to electromagnetic compatibility and the Directive dated February 19, (73/23/EEC) relating to low-voltage electrical equipment. Conformity with the above mentioned Directives indicated by the CE symbol attached to the device. Conformity may be affected by: interface cables not complying with the specifications of important instructions in the operator manual components not approved for this device by the manufacturer manipulation Ger erf die Anforderungen der Europ Normen durch Einhaltung der Richtlinie des Rates 3. Mai 1989 (89/336/EWG) bez der Elektromagnetischen Vertr sowie die Richtlinie vom 19. 1973 (73/23/EWG) bez Elektrischer Betriebsmittel mit Niederspannungen. Die Konformit zu oben angef Richtlinien ist durch das am Ger angebrachte CE-Zeichen gekennzeichnet. Die Konformit kann beeinflu werden durch: von nicht spezifizierten Schnittstellenkabeln wichtiger Hinweise der Bedienungsanleitung von Bauteilen, die nicht vom Hersteller f dieses Ger freigegeben wurden durch Unbefugte appareil remplit aux exigences des normes europ en respectant la directive du Conseil du 3 mai (89/336/CE) relative la compatibilit et la directive du 19f 1973 (73/23/CE) en du mat basse tension. La conformit aux directives mentionn ci-dessus est rep par la de conformit de la Communaut Europ (CE). La conformit peut influenc par:
Operator Manual d per l de servicio Printer matricielle a Matrice matricial Information equipment generates and uses radio frequency energy and if not and used properly, that is, in accordance with the manufacturer may cause interference in radio and television reception. It been type tested and found to comply with the limits for class B devices in accordance with the specification in subpart J of part of FCC rules, which are designed to provide reasonable protection such interference in a residential installation. However, there is no that interference will not occur in a partial installation. If this does cause interference to radio or television reception, which be determined by turning the equipment off and on, the user is to try to correct the interference by one or more of the following the receiving antenna, the peripheral away from the receiver, the peripheral away from the receiver the peripheral into a different outlet, so that the peripheral and are on different branch circuits necessary, the user should consult the dealer or an experienced technician for additional suggestions. The user may find following booklet, prepared by the Federal Communications Com- helpful: to Identify and Resolve Radio-TV Interference booklet is available from the U.S. Government Printing Office, Wash- DC 20402 Stock No. 004.000.00345.4. To comply with FCC regulations on electromagnetic inter- for a class B computing device, the printer cable must be shielded. assure compliance with FCC regulations for a computing device, use shielded interface cable with a metal shell connector. The use of cables properly shielded may result in violating FCC regulations. digital apparatus does not exceed the class B limits for radio noise from digital apparatus as set out in the radio interference of the Canadian department of communications. unit complies with DOC standard C108.8-M 1983 Le pr appareil num n pas de bruits d les limites applicables aux appareils de la classe B prescrites dans le r sur le brouillage par le minst des communications du Canada. device fulfils the European standards requirements by complying with the Directive of the Commission May 3, 1989 (89/336/EEC) relating to electromagnetic compatibility and the Directive dated February 19, (73/23/EEC) relating to low-voltage electrical equipment. Conformity with the above mentioned Directives indicated by the CE symbol attached to the device. Conformity may be affected by: interface cables not complying with the specifications of important instructions in the operator manual components not approved for this device by the manufacturer manipulation Ger erf die Anforderungen der Europ Normen durch Einhaltung der Richtlinie des Rates 3. Mai 1989 (89/336/EWG) bez der Elektromagnetischen Vertr sowie die Richtlinie vom 19. 1973 (73/23/EWG) bez Elektrischer Betriebsmittel mit Niederspannungen. Die Konformit zu oben angef Richtlinien ist durch das am Ger angebrachte CE-Zeichen gekennzeichnet. Die Konformit kann beeinflu werden durch: von nicht spezifizierten Schnittstellenkabeln wichtiger Hinweise der Bedienungsanleitung von Bauteilen, die nicht vom Hersteller f dieses Ger freigegeben wurden durch Unbefugte appareil remplit aux exigences des normes europ en respectant la directive du Conseil du 3 mai (89/336/CE) relative la compatibilit et la directive du 19f 1973 (73/23/CE) en du mat basse tension. La conformit aux directives mentionn ci-dessus est rep par la de conformit de la Communaut Europ (CE). La conformit peut influenc par: