Home » Fire-Lite SD300 Smoke Detector
File preview
Click the button below to download immediately for free
Show text preview
February 7, 1997 Photoelectric Detectors Addressable Devices Fire only) (SD300) (SD300T) (SD300) (SD300, SD300T) SD300 and SD300T Addressable Photoelectric De- are used exclusively with the Fire(cid:149)Lite MS-9200 Fire Alarm Control Panel. Since these de- are addressable, they will help emergency person- quickly locate a fire during its early stages, potentially precious rescue time while also reducing property The SD300T offers the same features as the while adding a 135(cid:176)F internal thermal element. Unique optical sensing chamber. Optional integral 135(cid:176)F (58(cid:176)C) fixed-temperature ther- detector (SD300T). Superior signal-to-noise ratio. Stable photoelectric operation. 1.6% nominal sensitivity for panel alarm threshold level. Fully coated circuit boards and superior RF/transient Addressable by device. Direct DECADE 01-99 entry of address. 2-Wire loop connection. Visible LED (cid:147)blinks(cid:148) every time the unit is addressed, and steady on alarm. Integral communications and built-in device type identifi- Compact, stylish design. Built-in functional test switch features push-in pin type Low standby current. Listed to UL 268. Built-in tamper-resistant feature. Designed for direct surface or electrical box mounting. Sealed against back pressure. Removable terminal block. Easy wiring via removable 6-pin terminal block allows the to be removed from system without loss of power remaining loop. Mounts to: single-gang box, 3.5″ or 4″ octagonal box, or square electrical box (using a plaster ring). Utilizes separate mounting bracket for ease of installa- and maintenance. 94-V0 plastic flammability rating. Removable cover and insect screen for field cleaning. Remote LED output connection. detectors are often faster than ionization de- in sensing smoke from slow smoldering fires. Ion- detectors are often better than photoelectric detec- at sensing fast, flaming fires. detectors are constructed of LEXAN in an off- color. SD300 Series of direct-wire smoke detectors is de- to commercial standards and offers an attractive is a registered trademark of GE Plastics, a subsidiary of Electric Company. document is not intended to be used for installation purposes. We try to keep our information up-to-date and accurate. We cannot cover all specific applications or all requirements. All specifications are subject to change without notice. For information, contact Fire(cid:149)Lite. Phone: (203) 484-7161 FAX: (203) 484-7118 Clintonville Road, Northford, Connecticut 06472 and Manufacturing System Certified to Standard ISO-9001 in the U.S.A. 1 of 2 (cid:151) DF-51320 SD300 Series direct-wire detectors use a separate bracket to simplify installation, service and main- the base on a box which is at least 1.5 inches (3.81 deep. Suitable boxes include: 4″ (10.16 cm) square box with plaster ring. 4″ (10.16 cm) octagonal box. 3.5″ (8.89 cm) octagonal box. Single-gang box. Because of the inherent supervision provided by the SLC end-of-line resistors are not required. Wiring (cid:147)T-taps(cid:148) or are permitted for Style 4 (Class (cid:147)B(cid:148)) wiring. SD300/SD300T uses one of 99 possible addresses the SLC loop. It responds to regular polls from the panel and reports its type and status. It blinks its when polled, and turns the LED on when commanded the panel. detector uses the light scattering principle. It repre- the latest in smoke sensing technology. SPECIFICATIONS range: – 28 VDC (peak). current: (cid:181)A @ 24 VDC. current: mA @ 24 VDC (latched “ON”).
February 7, 1997 Photoelectric Detectors Addressable Devices Fire only) (SD300) (SD300T) (SD300) (SD300, SD300T) SD300 and SD300T Addressable Photoelectric De- are used exclusively with the Fire(cid:149)Lite MS-9200 Fire Alarm Control Panel. Since these de- are addressable, they will help emergency person- quickly locate a fire during its early stages, potentially precious rescue time while also reducing property The SD300T offers the same features as the while adding a 135(cid:176)F internal thermal element. Unique optical sensing chamber. Optional integral 135(cid:176)F (58(cid:176)C) fixed-temperature ther- detector (SD300T). Superior signal-to-noise ratio. Stable photoelectric operation. 1.6% nominal sensitivity for panel alarm threshold level. Fully coated circuit boards and superior RF/transient Addressable by device. Direct DECADE 01-99 entry of address. 2-Wire loop connection. Visible LED (cid:147)blinks(cid:148) every time the unit is addressed, and steady on alarm. Integral communications and built-in device type identifi- Compact, stylish design. Built-in functional test switch features push-in pin type Low standby current. Listed to UL 268. Built-in tamper-resistant feature. Designed for direct surface or electrical box mounting. Sealed against back pressure. Removable terminal block. Easy wiring via removable 6-pin terminal block allows the to be removed from system without loss of power remaining loop. Mounts to: single-gang box, 3.5″ or 4″ octagonal box, or square electrical box (using a plaster ring). Utilizes separate mounting bracket for ease of installa- and maintenance. 94-V0 plastic flammability rating. Removable cover and insect screen for field cleaning. Remote LED output connection. detectors are often faster than ionization de- in sensing smoke from slow smoldering fires. Ion- detectors are often better than photoelectric detec- at sensing fast, flaming fires. detectors are constructed of LEXAN in an off- color. SD300 Series of direct-wire smoke detectors is de- to commercial standards and offers an attractive is a registered trademark of GE Plastics, a subsidiary of Electric Company. document is not intended to be used for installation purposes. We try to keep our information up-to-date and accurate. We cannot cover all specific applications or all requirements. All specifications are subject to change without notice. For information, contact Fire(cid:149)Lite. Phone: (203) 484-7161 FAX: (203) 484-7118 Clintonville Road, Northford, Connecticut 06472 and Manufacturing System Certified to Standard ISO-9001 in the U.S.A. 1 of 2 (cid:151) DF-51320 SD300 Series direct-wire detectors use a separate bracket to simplify installation, service and main- the base on a box which is at least 1.5 inches (3.81 deep. Suitable boxes include: 4″ (10.16 cm) square box with plaster ring. 4″ (10.16 cm) octagonal box. 3.5″ (8.89 cm) octagonal box. Single-gang box. Because of the inherent supervision provided by the SLC end-of-line resistors are not required. Wiring (cid:147)T-taps(cid:148) or are permitted for Style 4 (Class (cid:147)B(cid:148)) wiring. SD300/SD300T uses one of 99 possible addresses the SLC loop. It responds to regular polls from the panel and reports its type and status. It blinks its when polled, and turns the LED on when commanded the panel. detector uses the light scattering principle. It repre- the latest in smoke sensing technology. SPECIFICATIONS range: – 28 VDC (peak). current: (cid:181)A @ 24 VDC. current: mA @ 24 VDC (latched “ON”).