Home » Fire-Lite SpectrAlert® Advance Mini-Horns
File preview
Click the button below to download immediately for free
Show text preview
SpectrAlert Advance SpectrAlert Advance series of mini-horn sounders are to simplify installation to provide primary and sec- signaling for fire and security applications. MHR and MHW mini-horns operate at 12 and 24 volts and ideal for hotel, motel or residential fire system applications, a smaller notification device is desired. The mini-horns high and low volume settings, and temporal or non-tem- tones. The horns can be mounted to single gang back for aesthetically sensitive applications. Synchronization also provided when using the MDL3R, MDL3W module or Fire panel with the System Sensor sync protocol. MHR and MHW mini-horns can operate between 32 and degrees Fahrenheit from a regulated DC or full-wave recti- unfiltered power supply. They are listed to Underwriter Standard UL 464 for fire protective signaling systems. 12 and 24V operation. High and low volume settings. Temporal and non-temporal tones. Mounts to a single-gang backbox. Compatible with MDL sync module. Mechanically and electrically compatible with PA400 series sounders. SPECIALIZATIONS 4.6 x 2.9 x .45 2.67 oz. Temperature Range: 0 to 49 (32 to 120 Surface: Deep single-gang backbox (2-3/4 deep); Standard 4 x 4 back box. SPECIFICATIONS Terminals: 12 to 18 AWG Voltage: Regulated 12DC/FWR or 24DC/FWR Voltage: 8-33 Voltage with MDL3R/W: 9-33 shall be a System Sensor Model MHR or MHW of operating at nominal 12 or 24VDC and shall mount a single gang back box. Mini-horns shall be listed to Under- Laboratories Standard UL464 for fire protective signal- systems. Mini-horns shall operate between 32 and 120 Fahrenheit from a regulated DC, or full-wave rectified, power supply. When used with the Sync 12-volt rated notification appliance circuit outputs operate between nine and 17.5 volts; 24-volt rated notifi- appliance circuit outputs shall operate between 17 and volts. G-200 Devices and Approvals listings and approvals apply to the modules specified in document. In some cases, certain modules or applications not be listed by certain approval agencies, or listing may in progress. Consult factory for listing status. UL Listed: S4011 MEA: 7-07-E CSFM: 7135-1653:196 FM Approved: 3028007 Information Mini-Horn; Red. Mini-Horn; White. 2/9/10 Page 1 of 2 Sound Output and Current Draw Data OUTPUT (dBA) CURRENT DRAW (mA RMS) Position Sound Pattern VDC VFWR V V is a registered trademark and Mini-Alert is a trademark of International Inc. by Honeywell International Inc. All rights reserved. Unauthorized use this document is strictly prohibited. document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. cannot cover all specific applications or anticipate all requirements. specifications are subject to change without notice. more information, contact Fire Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. in the U.S. A. 2 of 2 df-60342:a1 2/9/10
SpectrAlert Advance SpectrAlert Advance series of mini-horn sounders are to simplify installation to provide primary and sec- signaling for fire and security applications. MHR and MHW mini-horns operate at 12 and 24 volts and ideal for hotel, motel or residential fire system applications, a smaller notification device is desired. The mini-horns high and low volume settings, and temporal or non-tem- tones. The horns can be mounted to single gang back for aesthetically sensitive applications. Synchronization also provided when using the MDL3R, MDL3W module or Fire panel with the System Sensor sync protocol. MHR and MHW mini-horns can operate between 32 and degrees Fahrenheit from a regulated DC or full-wave recti- unfiltered power supply. They are listed to Underwriter Standard UL 464 for fire protective signaling systems. 12 and 24V operation. High and low volume settings. Temporal and non-temporal tones. Mounts to a single-gang backbox. Compatible with MDL sync module. Mechanically and electrically compatible with PA400 series sounders. SPECIALIZATIONS 4.6 x 2.9 x .45 2.67 oz. Temperature Range: 0 to 49 (32 to 120 Surface: Deep single-gang backbox (2-3/4 deep); Standard 4 x 4 back box. SPECIFICATIONS Terminals: 12 to 18 AWG Voltage: Regulated 12DC/FWR or 24DC/FWR Voltage: 8-33 Voltage with MDL3R/W: 9-33 shall be a System Sensor Model MHR or MHW of operating at nominal 12 or 24VDC and shall mount a single gang back box. Mini-horns shall be listed to Under- Laboratories Standard UL464 for fire protective signal- systems. Mini-horns shall operate between 32 and 120 Fahrenheit from a regulated DC, or full-wave rectified, power supply. When used with the Sync 12-volt rated notification appliance circuit outputs operate between nine and 17.5 volts; 24-volt rated notifi- appliance circuit outputs shall operate between 17 and volts. G-200 Devices and Approvals listings and approvals apply to the modules specified in document. In some cases, certain modules or applications not be listed by certain approval agencies, or listing may in progress. Consult factory for listing status. UL Listed: S4011 MEA: 7-07-E CSFM: 7135-1653:196 FM Approved: 3028007 Information Mini-Horn; Red. Mini-Horn; White. 2/9/10 Page 1 of 2 Sound Output and Current Draw Data OUTPUT (dBA) CURRENT DRAW (mA RMS) Position Sound Pattern VDC VFWR V V is a registered trademark and Mini-Alert is a trademark of International Inc. by Honeywell International Inc. All rights reserved. Unauthorized use this document is strictly prohibited. document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. cannot cover all specific applications or anticipate all requirements. specifications are subject to change without notice. more information, contact Fire Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. in the U.S. A. 2 of 2 df-60342:a1 2/9/10