Fire-Lite SpectrAlert® Advance Output_Evacuation Speakers

SpectrAlert Advance Selectable Output Speaker Strobes and Voltage Evacuation Speakers SpectrAlert Advance series offers the broadest line of out- speakers and speaker strobes in the industry. From metal plastic outdoor back boxes, to white and red plastic hous- to wall and ceiling mounting options, virtually every appli- is covered. SpectrAlert Advance outdoor speakers and strobes offer reliable operation over the entire tempera- range of -40 to 151 They may be used indoors or out- in wet or dry applications. In addition, these speakers a broad frequency response range and low harmonic to provide an accurate and intelligible broadcast of messages. High sound pressure level at all tap set- ensures that messages are clearly heard. plug-in design allows the installer to pre-wire mounting and dress the wires before plugging in the speakers to reduce ground faults. This design also allows faster instal- with instant feedback to ensure that wiring is properly rotary switches to select voltage and power settings, field selectable candela settings for wall and ceiling speaker new weatherproof back boxes have plastic and metal ver- They are now designed to accommodate in-and-out wir- for daisy chaining outdoor devices. The plastic weatherproof boxes shipped with the product feature removable side and improved resistance to salt water corrosion. The hole knockouts located on the back of the weatherproof box eliminate the need to drill holes for screw-in mounting. weatherproof back boxes are available with 3/4 inch top bottom conduit entries and 3/4 inch knock-outs at the back. with each back box is a screw-in NPT plug with an O- gasket for a watertight seal. Metal back boxes are available Plug-in design Electrical compatibility with existing SpectrAlert products Shorting spring on mounting plate tests continuity before Rotary switch simplifies field selection of speaker voltage and settings Universal mounting plate for wall- and ceiling-mount units Weatherproof per NEMA 4x, IP56 Compatible with System Sensor synchronization protocol Automatic selection of 12 or 24-volt operation at 15 and 15/ candela Field selectable candela settings on wall and ceiling units Ceiling and wall mount application Listings and Approvals some cases, certain modules may not be listed by certain agencies, or listing may be in progress. Consult factory latest listing status. UL/ULC Listed: S4048 MEA: 10-08-E CSFM: 7320-1653:201 G–239 Devices SPECIFICATIONS Temperature: -40 to 151 (-40 to 66 Wall-Mount: SPS Speaker Strobe: 6.0 x 5.0 x 4.7 lens and speaker) SP Speaker: 6.0 x 5.0 x 2.9 Ceiling-Mount: SPS Speaker Strobe: 6.8 in Diameter x 4.7 lens and speaker) SP Speaker: 6.8 in Diameter x 2.9 Wall-Mount Weatherproof Backbox 6.5 x 5.5 x 2.9 Ceiling-Mount Weatherproof Backbox 7.2 x 29 Regulated 12VDC/FWR or SPECIFICATIONS Voltage (speakers): 25 Volts or 70.7 Volts (nominal) Supervisory Voltage (speakers): 50VDC Flash Rate: 1 flash per second Voltage Voltage Range (includes fire panels with built-in 8 to 17.5V (12V nominal) or 16 to 33V (24 nominal) Voltage with MDL Sync Module: to 17.5V (12V nominal) or 17 to 33V (24V nominal) Range: 400 to 4000Hz 1, 2 watts 11/9/11 Page 1 of 2 have an operating temperature from to 150.8 It have power taps and wattage settings which are selected rotary switches. The speaker must be installed with its weath- backbox in order to remain outdoor approved per UL/ listing S4048. The speaker shall be suitable for use in air spaces, as we