Fire-Lite SpectrAlert® Advance P2RHK-120 Outdoor 120 VAC Selectable Output Horn_Strobe

P2RHK-120 120 VAC Selectable Output SpectrAlert Advance selectable-output outdoor 120V is rich with features guaranteed to cut installation and maximize profits. SpectrAlert Advance series of notification appliances is to simplify installations, with features such as plug-in instant feedback messages to ensure correct installa- of individual devices, and field-selectable candela settings. installing the P2RHK-120, first attach the 120V mount- plate to the outdoor back box provided with each unit. connect the notification appliance circuit wiring to the terminals on the mounting plate. attach the horn/strobe to the mounting plate by insert- the product tabs in the mounting plate grooves. The will rotate into position, locking the product pins into mounting plate terminals. The device will temporarily hold place with a catch until it is secured with a captured mount- screw. SpectrAlert Advance series outdoor notification appli- are rated between minus 40 degrees Fahrenheit and degrees Fahrenheit in wet or dry applications. Plug-in design. Field selectable candela settings: 135, 150, 177, 185. Tamper resistant construction. Outdoor products rated from to 151 Regulated 120VAC. Rotary switch for horn tone and three volume selections. Outdoor products listed to UL 1638 (strobe) and UL 464 outdoor requirements. Outdoor products rainproof per UL 50 (NEMA 3R). Weatherproof back box included. Single screw attachment. Horn/strobe, 120VAC adapter mounting plate, and weather- back box included. horn/strobe shall be a System Sensor SpectrAlert Model _______ listed to UL 1971 and UL 464 and be approved for fire protective service. horn/strobe shall be wired as a primary-signaling notifica- appliance and comply with the Americans with Disabilities requirements for visible signaling appliances, flashing at over the strobe entire operating voltage range. The light shall consist of a xenon flash tube and associated system. The horn shall have three audibility and an option to switch between a temporal three-pat- and a non-temporal (continuous) pattern. These options set by a multiple position switch. On four-wire products, the shall be powered independently of the sounder. The on horn/strobe models shall operate on a coded or non- power supply. (cid:129) G-251 Devices PRODUCTS Advance outdoor horn/strobe shall be listed for use by UL and shall operate between minus 40 and 151 degrees Fahrenheit. The products shall be for use with a System Sensor outdoor/weatherproof box with half inch and three-fourths inch conduit entries. SPECIFICATIONS Temperature: to 151 ( to 66 Flash Rate: 1 flash per second. Voltage: Regulated 120 VAC. Voltage Range: 96 VAC. Terminal Wire Gauge: 12 to 18 AWG. Wall-mount Horns/Strobes: 5.6 L x 4.7 x 2.5 D (142 L x 119 mm W x 63.5 mm D). Weatherproof Backbox : 5.7 5.1 2.0 (145 mm L 130 mm W 51 mm D). DERATING K series products used at low temperatures, listed candela must be reduced in accordance with this table. Candela Candela rating Output (cd) 08/06/2009 Page 1 of 2 Line Information 2-wire Horn/Strobe, High cd, Red, Outdoor, P2RHK 2-wire horn/strobe, MP120K adapter mounting plate, and weatherproof back box. cd refers to strobes that include 135, 150, 177, and 185 settings. Listings and Approvals listings and approvals apply to the modules specified in document. In some cases, certain modules or applications not be listed by certain approval agencies, or listing may in process. Consult factory for latest listing status. UL Listed: S4011, S5512, S3593 CSFM: 7300-653:187 (outdoor