Fire-Lite SpectrAlert® Output Notification Appliances

SpectrAlert Advance Output Appliances Sensor SpectrAlert Advance selectable-output strobes and horn/strobes are rich with features guaran- to cut installation times and maximize profits. The Spec- Advance series of notification appliances is designed to your installations, with features such as: plug-in instant feedback messages to ensure correct installa- of individual devices, and eleven field-selectable candela for wall and ceiling strobes and horn/strobes. specifically, when installing Advance products, first a universal mounting plate to a four-inch square, four- octagon, or double-gang junction box. The two-wire plate attaches to a single-gang junction box. connect the notification appliance circuit wiring to the terminals on the mounting plate. attach the horn, strobe, or horn/strobe to the mounting by inserting the product tabs in the mounting plate The device will rotate into position, locking the prod- pins into the mounting plate terminals. The device will hold in place with a catch until it is secured with a mounting screw. Advance products allow you to choose: 12 or 24 volts. 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, or 185 can- by way of a rear-mounted slide switch and front view- window. Horn tones and volume by way of a rotary switch. The SpectrAlert Advance series includes outdoor notifica- appliances. Outdoor strobes and horn/strobes (two- and four-wire) are available for wall or ceiling. Outdoor are available for wall only. All System Sensor outdoor are rated between and 151 ( and in wet or dry applications. available: wall-mount: horn, strobe, 2-wire horn/strobe, 4-wire ceiling-mount: strobe, 2-wire horn/strobe, 4-wire Outdoor wall-mount: horn, strobe, 2-wire horn/strobe, 4- Outdoor ceiling-mount: strobe, 2-wire horn/strobe, 4-wire horn/strobe. Plug-in design. Same mounting plate for wall- and ceiling-mount units. Shorting spring on mounting plate for continuity check installation. Captive mounting screw. Tamper-resistance capability. Field-selectable candela settings on wall and ceiling units: 15/75, 30, 75, 95, 110, 115, 135, 150, 177, 185. Automatic selection of 12 or 24 volt operation at 15 and 15/ candela. Outdoor wall and ceiling products. G-235 Devices Ceiling Ceiling Wall Ceiling Wall Wall Outdoor products rated from and 151 ( and Outdoor products rainproof per UL50 (NEMA 3R) and per NEMA 4X, IP56 Minimal intrusion into the backbox. Horn rated at 88+ dbA at 16 volts. Rotary switch for tone selection. Three horn volume settings. Electrically compatible with existing SpectrAlert products. Specifications Advance horns, strobes, and horn/strobes shall to a standard 4.0″ x 4.0″ x 1.5″ (10.16 x 10.16 x 3.81 backbox, 4.0″ (10.16 cm) octagonal backbox, or a double- backbox. Two-wire products shall also mount to a single- 2.0″ x 4.0″ x 1.875″ (5.08 x 10.16 x 4.763 cm) backbox. A mounting plate shall be used for mounting ceiling wall products. The notification appliance circuit wiring terminate at the universal mounting plate. Also, Spec- Advance products, when used with the Sync accessory, shall be powered from a non-coded notifi- appliance circuit output and shall operate on a nominal or 24 volts. When used with the Sync Module, 12- rated notification appliance circuit outputs shall operate 9 and 17.5 volts; 24-volt rated notification appliance outputs shall