Fire-Lite System Sensor SpectrAlert SP2 Series Wall Speaker_Strobes

GENERAL Sensor SpectrAlert SP2 Wall Speaker/Strobes leading-edge strobe and speaker technologies with user-friendly, uniquely styled design. The SpectrAlert SP2 Series combines the current draw of the original SpectrAlert strobes with the sound quality of the SpectrAlert SP200 Series evacu- speakers. The SpectrAlert SP2 Series includes sev- features to simplify installation. With field-reversible the SP2 wall speaker/strobe may be mounted the strobe on the right or left to avoid potential obstruc- The unit may be secured to a 4″ x 4″ x 2-1/8″ (101.6 101.6 x 53.975 mm) backbox without an extension ring. optional backbox skirt is available for surface-mount ap- As with other SpectrAlert products, the SP2 speaker/strobes feature flexibility for a wide variety of The 24-volt strobe is available in five different The speaker offers field-selectable 25.0/70.7 volt- and 1/4, 1/2, 1, and 2 watt power taps. Product appearance is important to most owners. The SP2 Series wall speaker/strobes in- features and aesthetic curves similar to those of SpectrAlert horns and strobes for a more appealing look. Combines SpectrAlert strobe and speaker technologies for current draw and fidelity sound quality. Sync(cid:127)Circuit module available for synchronizing strobe. 24-volt models available with 15, 15/75, 30, 75, and 110 strobes. 25.0 and 70.7 volt speaker with four field-selectable power Field-reversible strobe for left or right mounting options. Fits standard 4″ x 4″ x 2-1/8″ (101.6 x 101.6 x 53.975 mm) without an extension ring. Optional surface-mount backbox skirt available. Specifications: 8.27″ wide x 4.91″ high x 2.22″ deep strobe 1.10″ deep speaker (210.058 mm wide x 124.714 mm x 56.388 mm deep strobe and 27.940 mm deep to 4″ x 4″ x 2.125″ (101.6 x 101.6 x 53.975 mm) no extension ring required. operating temperature: 32 to 120 (0 to 49 Specifications: 7, 2000 (cid:127) G-350 SP2 Series Speaker/Strobes Audio-Visual Devices Fire operating voltage: 24 VDC and FWR unfiltered. voltage range*: 24 V, 20 30 V. voltage range with Sync(cid:127)Circuit module*: 24 21 30 V. terminals: 12 to 18 AWG (3.25 to 0.75 mm These product should be operated within their rated range. UL does, however, test functional integrity to -20% +10% of manufacturer stated ranges. Specifications: voltage: 25.0 or 70.7 VRMS (nominal). terminals: 12 to 18 AWG (3.25 to 0.75 mm range: 400 to 4,000 Hz. NOTE: The SP2C Series UL listed from 400 to 4,000 Hz, but will provide an output from to 10,000 Hz. taps: 1/4, 1/2, 1, and 2 watts. Output: 10 feet (dBA) Reverberant Anechoic W 1 W 1/2 W 1/4 W and Sync(cid:127)Circuit are trademarks of System Sensor, a division of Pittway Corporation. document is not intended to be used for installation purposes. We try to keep our product up-to-date and accurate. We cannot cover all specific applications or anticipate all All specifications are subject to change without notice. For more information, Fire(cid:127)Lite Alarms, One Fire-Lite Place, Northford, Connecticut 06472. Phone: (800) 627- Toll Free FAX: (877) 699-4105, FAX Back:(888) 388-3299 www.firelite.com 03/07/00 Page 1 of 2 Strobe Feature: assembly ships with the strobe on the right-hand side. a left-mounted strobe, perform the following steps: Re- the strobe screw (near top of strobe assembly above lettering). Lift the strobe assembly out of the rib slot the right-hand side. Rotate the strobe 180 Remount it the left-hand side of the base using the strobe screw and rib slot on the left-hand side. speaker/strobe shall be a System Sensor Model _____ to UL 1480 and UL 1971 and be approved for f