Fire-Lite VisorAlarm Plus IP

g PLUS Alarm Receiver MIP and IPDACT modules VisorALARM PLUS receiver is Teldat solution to manage receive alarms from burglar and/or fire alarm panels with Teldat MIP or FireLite IPDACT IP alarm trans- modules. Each VisorALARM PLUS receiver supports to 3,000 alarm panels and provides the industry most set of features including line supervision, 512 bit and a three level redundancy system for the highest availability and reliability levels. Integration with central automation software packages is almost immediate as VisorALARM PLUS receiver is able to emulate the industry common receiver protocols. Communication between the PLUS receiver and the automation server com- is done via a regular serial connection. Scalability: Simultaneous management for up to 3,000 MIP IPDACT IP remote devices. Line monitoring: Monitors connectivity status with all regis- devices. Network access monitoring: Monitors the status of its net- access to avoid generating false technical alarms under communications failure situation. Support for dynamic and static IP addresses on the MIP and IPDACT devices. Encryption: Uses 512 bit AES encryption algorithm for all with installed IP modules. Communicates alarms to the automation server via a connection, using ContactID format and emulating Sur- Radionics or Ademco receiver protocols. Smart card: Saves all configuration information on an exter- smart card that can be used for immediate system under crash recovery situations. Secondary receiver support: Two VisorALARMs PLUS be setup in a primary/secondary configuration for high and redundancy options. Teldat MIP and units in the field will report to the primary unit and Events 300 Failure in the receiver ventilators 350 mIP is not sending polling traffic 356 Loss of connectivity in the central line 358 Main receiver has detected the backup receiver down 394 mIP begins to poll the backup receiver 395 Configuration error in the mIP 396 Main receiver has activated 397 Receiver has lost IP communication 398 Backup receiver has activated 399 Backup receiver has activated as a result of the receiver being down 531 A new mIP has been registered 633 Free space in the alarms buffer is above 25% 634 Free space in the alarms buffer is below 25% 635 Alarms buffer is full (cid:129) A3-40 automatically switch to the secondary receiver if the pri- becomes unavailable. Secondary receiver automatic synchronization: The pri- and secondary VisorALARM PLUS receivers support TRCP protocol that allows them both to maintain identical files. Back up receiver automatic takeover: An additional VisorALARM PLUS receiver can be placed in the network as the primary receiver, programming the unit takeover the identity of the primary receiver under the that it becomes unavailable. Local and remote management tools: Local management a console-type serial connection. available management is implemented via a telnet session. Real time embedded operating system: for maximum per- and protection against viruses and hacker attacks. Display and keyboard: Management, monitoring and alarm directly from your receiver front keys and display. Alarm automation server connection: The VisorALARM receiver can be connected to the automation server via regular serial connection cable (included with the unit). Alarm automation configuration: The VisorALARM PLUS Surgard, Radionics and Ademco protocols for easy with any alarm automation software (SIS, IBS, Microkey, etc.). Configuration scripts: VisorALARM PLUS allows configu- scripts to be uploaded via the console or telnet ses- Most common configuration scripts are available at Security website, allowing the user to download the and use them as templates to add customer specific Backup Options VisorALARM PLUS receiver implements advanced network functionalities which allow all installed MIPs or IPDAC