Home » Fire-Lite Wheelock MT Multitone Electronic Appliances
File preview
Click the button below to download immediately for free
Show text preview
July 8, 2004 (cid:127) G-500 MT Electronic Appliances Audio/Visual Devices E5946/S5391 Strobe Models) Fire Series MT and MT Strobe Multitone electronic offer a choice of eight (8) nationally and in- recognized alerting sounds: Horn, Bell, March Horn, Code-3 Tone, Code-3 Horn, Slow Whoop, Si- or Hi/Lo Tone. The Code-3 Horn and tone patterns engineered to comply with NFPA/ANSI Temporal Pat- specifications without requiring additional equipment. MT and MT Strobe appliances, one alarm appliance most of your signaling needs. Strobe models can synchronized using the Wheelock SM, DSM Sync Mod- or a power supply equipped with Wheelock pat- Sync Protocol. MT Strobes are designed for ADA applications with performance, reliability and cost-effectiveness meeting or exceeding the latest requirements of 72, ANSI 117.1, UFC and UL Standard 1971 as well meeting ADA requirements concerning photosensitive MT and MT Strobe appliance has two installer selec- sound output levels: STANDARD dBA and HIGH dBA. versions provide selectable voltage capability one unit, 12VDC or 24VDC. Strobe versions are specific either 12VDC or 24VDC and all models may be used filtered or unfiltered (full-wave-rectified) input voltages. input terminals are available, shunt wires are to enable both tone and strobe to operate simul- from a single input. Series MT Multitone Strobe appliances are UL Listed indoor wall mount applications under Standard 1971 Signaling Devices for the Hearing Impaired and under 464 for Audible Signaling Appliances. One alarm appliance with (8) eight selective signals provide superior sound penetration for various and wall conditions with two field selectable output levels Audible and strobe can operate from a single NAC with any of the (8) eight audible sounds Selectable input voltage on non-strobe versions. versions are factory set for either 12 or with wide-Listed voltage range, filtered (DC) FWR Designed to meet or exceed ADA/NFPA/UFC/ANSI and Accessibility Guidelines Complies with OSHA 29, Part 1910.165 MT Series MT appliances have IN and OUT wiring that accept two #12 to #18 American Gauge (AWG) wires at each terminal. Inputs polarized for compatibility with standard reverse type supervision Code-3 Horn and Tone meet ANSI/NFPA temporal for standard emergency evacuation signaling MT Strobe models available with 1575 and 75 ratings for independent or single input and can be synchronized using SM or DSM sync module(s) or a power supply built-in Wheelock Sync Protocol Mounts to either 4″ square or double gang boxes for retrofit installations). Attractive flush or mounting No additional trimplate required for flush mounting Alarms is a Honeywell company. document is not intended to be used for installation purposes. We try to keep our product up-to-date and accurate. We cannot cover all specific applications or anticipate all All specifications are subject to change without notice. more information, contact Fire(cid:127)Lite Alarms , One Fire-Lite Place, Northford, Connecticut 06472. (800) 627-3473, Toll-Free FAX: (877) 699-4105. 07/08/04 Page 1 of 4 READ THESE SPECIFICATIONS AND INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING, SPECIFYING OR THIS PRODUCT. FAILURE TO COMPLY WITH ANY OF THE FOLLOWING INSTRUCTIONS, CAUTIONS AND WARNINGS RESULT IN IMPROPER APPLICATION, INSTALLATION AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS. NOTES ON STROBES Strobes are designed to flash at 1 flash per second over their Voltage Range Note NFPA-72 specifies a flash rate of 1 to 2 flashes second and ADA Guidelines specifies a flash of 1 to 3 flashes per second. TONES
July 8, 2004 (cid:127) G-500 MT Electronic Appliances Audio/Visual Devices E5946/S5391 Strobe Models) Fire Series MT and MT Strobe Multitone electronic offer a choice of eight (8) nationally and in- recognized alerting sounds: Horn, Bell, March Horn, Code-3 Tone, Code-3 Horn, Slow Whoop, Si- or Hi/Lo Tone. The Code-3 Horn and tone patterns engineered to comply with NFPA/ANSI Temporal Pat- specifications without requiring additional equipment. MT and MT Strobe appliances, one alarm appliance most of your signaling needs. Strobe models can synchronized using the Wheelock SM, DSM Sync Mod- or a power supply equipped with Wheelock pat- Sync Protocol. MT Strobes are designed for ADA applications with performance, reliability and cost-effectiveness meeting or exceeding the latest requirements of 72, ANSI 117.1, UFC and UL Standard 1971 as well meeting ADA requirements concerning photosensitive MT and MT Strobe appliance has two installer selec- sound output levels: STANDARD dBA and HIGH dBA. versions provide selectable voltage capability one unit, 12VDC or 24VDC. Strobe versions are specific either 12VDC or 24VDC and all models may be used filtered or unfiltered (full-wave-rectified) input voltages. input terminals are available, shunt wires are to enable both tone and strobe to operate simul- from a single input. Series MT Multitone Strobe appliances are UL Listed indoor wall mount applications under Standard 1971 Signaling Devices for the Hearing Impaired and under 464 for Audible Signaling Appliances. One alarm appliance with (8) eight selective signals provide superior sound penetration for various and wall conditions with two field selectable output levels Audible and strobe can operate from a single NAC with any of the (8) eight audible sounds Selectable input voltage on non-strobe versions. versions are factory set for either 12 or with wide-Listed voltage range, filtered (DC) FWR Designed to meet or exceed ADA/NFPA/UFC/ANSI and Accessibility Guidelines Complies with OSHA 29, Part 1910.165 MT Series MT appliances have IN and OUT wiring that accept two #12 to #18 American Gauge (AWG) wires at each terminal. Inputs polarized for compatibility with standard reverse type supervision Code-3 Horn and Tone meet ANSI/NFPA temporal for standard emergency evacuation signaling MT Strobe models available with 1575 and 75 ratings for independent or single input and can be synchronized using SM or DSM sync module(s) or a power supply built-in Wheelock Sync Protocol Mounts to either 4″ square or double gang boxes for retrofit installations). Attractive flush or mounting No additional trimplate required for flush mounting Alarms is a Honeywell company. document is not intended to be used for installation purposes. We try to keep our product up-to-date and accurate. We cannot cover all specific applications or anticipate all All specifications are subject to change without notice. more information, contact Fire(cid:127)Lite Alarms , One Fire-Lite Place, Northford, Connecticut 06472. (800) 627-3473, Toll-Free FAX: (877) 699-4105. 07/08/04 Page 1 of 4 READ THESE SPECIFICATIONS AND INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING, SPECIFYING OR THIS PRODUCT. FAILURE TO COMPLY WITH ANY OF THE FOLLOWING INSTRUCTIONS, CAUTIONS AND WARNINGS RESULT IN IMPROPER APPLICATION, INSTALLATION AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS. NOTES ON STROBES Strobes are designed to flash at 1 flash per second over their Voltage Range Note NFPA-72 specifies a flash rate of 1 to 2 flashes second and ADA Guidelines specifies a flash of 1 to 3 flashes per second. TONES