Fire-Lite AD355(A)

AD355 A Multi Sensor Profile Intelligent Detector AD355 A ADAPT detector is an intelligent address multi sensing low profile detector designed for use with Fire Alarm Control Panels ADAPT detector uses a combination of photoelectric and sensing technologies to increase immunity to false Unlike traditional intelligent detectors the ADAPT has a microprocessor in the detector head that pro alarm data As a result the ADAPT detector adjusts its automatically without operator intervention or con panel programming where the ADAPT detector is especially useful include complexes schools college campuses manufacturing industrial facilities and anywhere else the use of a partic area may change The ADAPT detector automatically its sensitivity to the environment is a communication protocol developed to greatly the speed of communication between analog intelli devices and compatible systems Intelligent devices com in a grouped fashion If one of the devices within the has new information the panel CPU stops the group and concentrates on single points The net effect is speed greater than five times that of earlier designs Automatically adjusts sensitivity levels without operator or programming Sensitivity increases with Microprocessor based combination photo and thermal Compatible with LiteSpeed and CLIP systems Addressable analog communication Sleek low profile design Two wire SLC connection Rotary decimal addressing 01 159 with MS 9600UDLS MS 9600LS series systems and 01 99 with MS Firmware 4 Addresses can be viewed and changed without electronic Dual bi color LED design provides 360 viewing angle LEDs lock red when in alarm In LiteSpeed LEDs flash in standby for normal condition Built in tamper resistant feature Constructed of off white fire resistant plastic designed to standards and offers an attractive appearance SEMS screws for wiring of the separate base Several base options including relay isolator and sounder Built in functional test switch activated by external magnet Listed to UL 268 auto adjusting levels 1 to 2 ft and 2 to 4 ft classic CLIP systems 1 to 2 2 to 3 and 3 to 4 ft with systems fixed sensitivity levels 1 2 and 4 ft E 810 Devices in B210LP A Base classic CLIP systems 0.5 1 2 3 and 4 ft with FlashS systems 2.0 5.3 cm high base determines diameter B210LP A 6.1 15.5 cm diameter B501 A 4.1 10.4 cm diameter B200SR A 6.875 17.46 cm diameter B224RB A 6.2 15.748 cm diameter weight 5.2 oz 147 g temperature 0 to 38 32 to 100 velocity range 0 4000 ft min 1219.2 m min for installation in ducts humidity 10 93 noncondensing sensing rating fixed temperature setpoint 135 SPECIFICATIONS range 15 32 volts DC peak current max avg 300 resistance 50 ohms maximum varies according to panel used Refer to panel installation manuals current max 6.5 mA 24 VDC AD355 A plug in detector uses a separate base to sim installation service and maintenance A special tool maintenance personnel to plug in and remove detec without using a ladder Suitable mounting base boxes 4.0 10.16 cm square box 3.5 8.89 cm or 4.0 10.16 cm octagonal box Single gang box except relay or isolator base The AD355 A detector has the unique ability to adjust according to the environment based on heat and levels Avoid installing these detectors in locations that are to rapid and high temperature changes An example of incorrect application would be near or in line with the output of a heater 12 07 2011 Page 1 of 2 Listings and Approvals listings and approvals apply to the modules specified in In some cases certain modules or applications may not listed by certain approval agencies or listing may be in pro Consult factory for latest listing status UL Listed S1059 ULC Listed S1059 MEA Listed 243 02 E FM Approved CSFM 7272 0075 0194 Information suffix indicates ULC Listed model Low profile intelligent multi sensor detector Same as AD355 but with ULC Listing BASES suffix indicates ULC Listed model The detector plug in base can be changed off for special For details about intelligent bases and their mount see DF 60059 Plug in detector base included standard U S low profile mounting base Bulk pack of B210LP package contains 10 Flangeless mounting base Bulk pack of B501 package contains 10 Intelligent sounder base capable of producing output with ANSI Temporal 3 or continuous tone B501BH series bases in retrofit applications Relay base Screw terminals up to 14 AWG 2.0 Relay type Form C Rating 2.0 A 30 VDC resistive A 110 VDC inductive 1.0 A 30 VDC inductive Isolator base Maximum 25 devices between iso bases Retrofit flange to convert B210LP to match the profile or to convert older high profile bases low profile Bulk pack of F110 package contains 15 Replacement flange for B210LP A base Remote LED annunciator 3 32 VDC Fits U S electrical box Supported by B210LP A and bases only Surface mounting kit for use with B210LP A Test magnet Test magnet with telescoping handle Detector removal tool Allows installation and or of LiteSpeed Series detector heads from base in ceiling installations Detector removal tool without pole Extension pole for XR2B Comes in three 5 foot 1.524 sections and Fire are registered trademarks and LiteSpeed is a of Honeywell International Inc by Honeywell International Inc All rights reserved Unauthorized use this document is strictly prohibited document is not intended to be used for installation purposes We try to keep our product information up to date and accurate cannot cover all specific applications or anticipate all requirements specifications are subject to change without notice more information contact Fire Alarms Phone 800 627 3473 FAX 877 699 4105 in the U S A 2 of 2 DF 52386 C 12 07 2011