Fire-Lite AD365(-IV) Multi-Criteria Detector Data Sheet

AD365 IV and AD365A IV Photo Thermal Infrared Description AD365 IV and AD365A IV are plug in addressable multi crite detectors that replace the AD355 Series They combine photo thermal and infrared PTIR sensors in one unit to sense components of a fire This approach enables enhanced to real fire with heightened immunity to nuisance particu sensors and communication can greatly reduce nuisance compared to single sensing methods Sophisticated algo maximize the advantages of the sensor types This detection offers heightened immunity to nuisance particulates and sensitivity to real fire Photoelectric sensors detect airborne particles associated with Thermal sensors detect heat and rate of rise 135 fixed tem threshold The Infrared sensor discerns light patterns in the environment as additional data point for alarm determination ability to reject certain nuisance alarm triggers such as theater supports the use of the detector in applications where mod to heavy nuisance conditions exist that might cause single detectors to trigger a false alarm PTIR detector meets both UL 268 and UL 521 listing require and can indicate distinct smoke and heat alarms This dual supports a local alarm setting for photoelectric detection and general evacuation setting based on thermal detection This can work interruptions in multi level buildings Multi criteria detection UL 268 and UL 521 Listed New modern profile Analog communications Low standby current Rotary address switches Dual LEDs for 360 visibility Expanded color options LiteSpeed protocol support on all models LiteSpeed and CLIP support on IV models Height 2.0 51 mm installed in B300 A 6 base Diameter 6.2 156 mm installed in B300 A 6 base 4.1 104 installed in B501 WHITE IV BL base Weight 3.4 oz 95 g Color White IV models are ivory Operating Humidity Range 15 to 90 Relative Humidity Non Operating Temperature Range 32 to 100 0 to 38 Air Velocity 0 to 300 ft min 0 to 91.4 m min SPECIFICATIONS Operating Voltage Range 15 to 32 VDC Devices Operating Current 24 VDC 200 uA one communication every seconds with green LED blink on communication Maximum Alarm Current 2 mA 24 VDC one communication 5 seconds with red LED solid on Maximum Current 4.5 mA 24 VDC one communication every seconds with amber LED solid on Load Rating 0.0063 devices in this datasheet meet the standards of UL 268 CAN S529 Listings and Approvals listings and approvals below apply to the AD365 IV and In some cases certain modules may not be listed by approval agencies or listing may be in process Consult the for the latest listing status S1059 Approved 7272 0075 0507 7 15 2019 Page 1 of 2 Information suffix indicates support of LiteSpeed and CLIP Multi criteria photoelectric thermal and infrared smoke LiteSpeed UL listed white For ivory order AD365 IV and CLIP Multi criteria photoelectric thermal and infrared smoke LiteSpeed ULC listed white For ivory order AD365A IV and CLIP 4 Mounting base white 4 mounting base white 10 pack 4 Mounting base ivory 4 Mounting base black 6 Flanged mounting base white For ULC order B300A 6 6 Flanged mounting base white 10 pack 6 Flanged mounting base ivory For ULC order B300A Intelligent addressable sounder base white For ULC B200SA WH Intelligent addressable sounder base ivory For ULC B200SA IV Intelligent addressable sounder base low fre white UL listed Intelligent addressable sounder base low frequency UL listed Isolator base white For ULC order B224BIA WH Isolator base ivory For ULC order B224BIA IV Relay base white For ULC order B224RBA WH Relay base ivory For ULC order B224RBA IV Surface mounting kit flanged Trim ring white Trim ring ivory IR color kit includes cover and trim ring white 10 pack IR color kit includes cover and trim ring ivory 10 IR color kit includes cover and trim ring black 10 Remote LED annunciator For ULC order RA100ZA Detector test magnet Telescoping test magnet is a trademark and Fire Alarms is a registered trademark of International Inc by Honeywell International Inc All rights reserved Unauthorized use of this is strictly prohibited document is not intended to be used for installation purposes We try to keep our product information up to date and accurate cannot cover all specific applications or anticipate all requirements specifications are subject to change without notice more information contact Fire Alarms Phone 800 627 3473 FAX 877 699 4105 of Origin Mexico 2 of 2 DF 62007 B 7 15 2019