Fire-Lite BG 10WP Series Manual Pull Station PID

BG 10WP Outdoor Pull Station INSTALLATION DRAWING 15452 Revision D ECN 00 236 04 24 00 Pipe Plug 3 4 14 THD on top or bottom dimples provided as hole starters mounting backbox to wall supplied by customer Procedure Mount outdoor backbox to pipe top or bottom Remove paper backing from and secure to backbox Connect wires from conduit to station terminal block Attach pull station using supplied with WP 10 Station to fasten pull station to the Supplied the WP 10 With Rear access Conduit the installation requires running conduit through rear of the backbox drill a new access hole and the unused holes on top bottom Use UL plugs or ones similar to the one supplied UL requirements this hole must be located the raised lettering will not be damaged is a space of 1.875 in 47.625 mm avail between the lettering and the lower edge of backbox UL Listed Liquid Tight Flexible Metal Fittings Category Control Number are suitable for use with these backboxes location for rear access hole size 1.875 in 47.625 mm 15452 Revision D