Fire-Lite CMF-300-6(A)

Circuit Supervised Control Module SYNC 1 Accessory Card cid 129 E 920 Devices CMF 300 6 six circuit supervised control module intelligent alarm systems with supervised monitoring wiring to load devices that require an external power supply operate such as horns strobes or bells Each module is for switching applications involving AC or DC which wiring supervision Upon command from the control the CMF 300 6 will disconnect the supervision and con the external power supply across the load device first module is addressed from 01 to 154 MS 9600 series while the remaining modules are automatically assigned the next five higher addresses On an MS 9050UD MS or MS 9200UDLS the addressing would be 01 to 94 CMF 300 6 module has terminals for connection to an supply circuit for powering devices on its notification circuit NAC One or multiple power supplies may used Provisions are included for disabling a maximum of three addresses CMF 300 6 module features a short circuit protection to protect the external power supply against short cir conditions on the NAC When an alarm condition occurs relay which connects the external supply to the NAC will be allowed to close if a short circuit condition currently on the NAC Additionally an algorithm is incorporated to shorts when the module is active The CMF 300 6 module close all circuits that are not shorted to find the NAC with problem CMF 300 6 module has panel controlled green LED indi The panel can cause the LEDs to blink latch on or off SYNC 1 accessory card provides the CMF 300 6 with functionality with compatible System Sensor and SpectrAlert Advance audio visual devices Six addressable Style B Class B or three addressable D Class A outputs that function as notification appli circuits Removable 12 AWG 3.31 mm to 18 AWG 0.821 mm terminal blocks Status indicators for each point Unused addresses may be disabled Rotary address switches LiteSpeed or CLIP operation Optional SYNC 1 accessory card for SpectrAlert and Advance devices Mount one or two modules in a BB 2F cabinet optional Mount up to six modules on a CHS 6 chassis in a BB 6F or cabinet optional Mounting hardware included current 2.25 mA SLC current draw with all used if some addresses are disabled the standby decreases current 35 mA assumes all six NACS have been once and all six LEDs solid ON range 32 to 120 0 to 49 for UL appli to 55 for EN54 applications 10 to 85 noncondensing for UL applications to 93 noncondensing for EN54 applications 6.8 172.72 mm high x 5.8 147.32 mm wide 1.25 31.75 mm deep weight 1.1 lb 0.499 kg including packaging options CHS 6 chassis BB 6F cabinet BB 25 BB 2F cabinet gauge 12 AWG 3.31 mm to 18 AWG 0.821 mm is shipped in Class B position remove shunt for A operation SLC wiring resistance 40 ohms on MS 9600 MS 9200UDLS MS 9050UD and MS 9200 NAC wiring resistance 40 ohms rating per circuit to 50 W 70.7 VAC 50 W 25 UL applications only contact ratings 30 VDC 110 VAC ratings 3.0 A 30 VDC maximum resistive non coded 2.0 A 30 VDC maximum resistive coded 1.0 A 30 VDC maximum inductive L R 2 ms coded 0.5 A 30 VDC maximum inductive L R 5 ms coded 0.9 A 70.7 VAC maximum resistive non coded 0.7 A 70.7 VAC maximum inductive PF 0.35 non 3 4 2015 Page 1 of 2 not be listed by certain approval agencies or listing may in process Consult factory for latest listing status UL Listed S2424 ULC Listed S2424 MEA Listed 55 02 E 226 03 E SYNC 1 FM Approved Local Protective Signaling CSFM 7300 0075 0205 7300 1209 0219 SYNC 1 Maryland State Fire Marshal Permit 2106 CMF 300 6 devices See the documentation for your panel the Fire Lite Device Compatibility document Contact Fire See also list of devices compatible with SYNC 1 below Accessory Card SYNC 1 accessory card is designed to operate with the It works with the SpectrAlert and the SpectrAlert series of horns strobes and horn strobes to provide means of synchronizing the temporal coded horns synchro the one second flash timing of the strobe and silencing horns of the horn strobe combination over a two wire cir while leaving the strobes active Each SYNC 1 accessory is capable of synchronizing six Class B circuits or three A circuits load on a loop 3 A temperature 32 to 120 0 to 49 size 12 to 18 AWG 3.31 to 0.821 mm voltage range 11 to 30 VDC FWR filtered or Refer to notification appliance installation instruc for number of notification appliances and wire size A V devices The SYNC 1 Accessory Card is with all System Sensor SpectrAlert and SpectrAlert Audio Visual Devices that have synchronization Other manufacturers may be supported as well refer to the latest Device Compatibility Document 15384 SpectrAlert and SpectrAlert Advance products utilizing module below Line Information Six circuit supervised control module Same as above with ULC Listing Optional accessory card for synchronization of com System Sensor SpectrAlert horns strobes and horn Optional cabinet for one or two modules Dimensions 9.234 23.454 cm wide 9.484 24.089 cm including x 12.218 31.0337 cm high x 0.672 1.7068 cm BACKBOX 9.0 22.860 cm wide 9.25 23.495 cm hinges x 12.0 30.480 cm high x 2.75 6.985 cm installed 7.150 18.161 cm wide overall x 18.5725 cm high interior overall x 2.156 5.4762 cm overall Optional cabinet for up to six modules mounted on chassis below Dimensions DOOR 24.0 60.96 wide x 12.632 32.0852 cm high x 1.25 3.175 cm hinged at bottom BACKBOX 24.0 60.96 cm wide x 31.877 cm high x 5.218 13.2537 cm deep Chassis mounts up to six modules in the BB 6F Listings and Approvals listings and approvals apply to the modules specified in document In some cases certain modules or applications FireLite Alarms SpectrAlert SpectrAlert Advance System Sensor are registered trademarks of Honeywell International by Honeywell International Inc All rights reserved Unauthorized use this document is strictly prohibited document is not intended to be used for installation purposes We try to keep our product information up to date and accurate cannot cover all specific applications or anticipate all requirements specifications are subject to change without notice more information contact Fire cid 129 Lite Alarms Phone 800 627 3473 FAX 877 699 4105 in the U S A 2 of 2 DF 52365 B cid 129 3 4 2015