Fire-Lite IPCHSKIT

IPCHSKIT Installation Document 53294 A1 09 21 2009 09 628 IPCHSKIT comes with all hardware necessary to mount the IP Communicator onto a chassis mounting plate two 2 female 4 40 x 0.75 standoffs P N 42042 four 4 4 40 x 0.25 screws P N 38134 four 4 1 1 8 Snap in support posts P N 42215 plastic wiring label cover P N 53255 mounting for the IPDACT is in a CHS 4 Series chassis positioned with the required UDACT oriented as below The IPDACT must always be placed in the 4th position and in the front location for access to wiring After the plastic cover to the IPDACT with the snap in support posts secure the mounting plate to the back of the Then insert the tab at the bottom of the plate into the slot on the chassis and attach as shown plate 2 screws required 1.75 standoffs and 2 0.25 screws ship with UDACT standoffs and 2 screws required plate 4th position cover to IPDACT then to mounting plate Chassis 4th position cover to IPDACT then to mounting plate 4 total screws required screw locations plate Installation on a CHS M2 the same as the CHS M3 2 screws required plate cover to then to plate 4th position 2 screw locations If mounting the in this configuration the must be mounted in a chassis directly below one and in the 4th position applications where the is installed in the 4th of the NFS2 640 chassis the IPDACT in the 4th of a separate chassis 4th position cover to IPDACT then to mounting plate