Fire-Lite ISO-6 Six Fault Isolator Module

ISO 6 A Fault Isolator Module ISO 6 A Six Fault Isolator Module provides six equivalent that will allow a portion of the communications loop to operating when a short circuit occurs on that loop An LED indicator will blink in the normal state for each of six inputs and will latch on during a short circuit condition module will automatically restore the communications to normal condition when the short circuit is removed ISO 6 Six Isolator Module is an automatic switch that when the line voltage drops below four volts Isolator should be spaced between groups of sensors or in a loop to protect the rest of the loop If a short between any two isolators then both isolators immedi switch to an open circuit state and isolate the devices them The remaining units on the loop continue to operate LED status indicators Removable 12 to 18 AWG plug in terminal blocks Six individual Class B isolator circuits Mount up to two modules in BB 2F enclosure optional Mount up to six modules on a CHS 6 chassis in a BB 6F Mounting hardware included ISO 6 Fault Isolator Modules should be spaced between of sensors in an SLC to protect the rest of the loop to isolate short circuit problems within a section of a loop that other sections can continue to operate normally The supports a maximum of 25 devices between isolators more than 100 Isolator Modules are connected to an loop the address capacity of the loop is reduced by two addresses for every isolator device in excess of 100 Operating Voltage 15 32 VDC Current 450 per circuit 2.7 mA all circuits Current Draw 17 mA per circuit in isolation 102 with all circuits in isolation Range 32 F to 120 F 0 C to 49 C 10 to 85 non condensing 6.8 H x 5.8 W x 1.0 D weight 1.1 lb 0.50 kg including packaging Options CHS 6 Chassis BB 2F Cabinet BB 6F Gauge 12 AWG 3.31 mm to 18 AWG 0.821 mm Devices See the documentation for your panel the Fire Lite Device Compatibility Document Devices Listings and Approvals listings and approvals below apply to ISO 6 components In cases certain modules or applications may not be listed certain approval agencies or listing may be in process Con factory for latest listing status UL ULC Listed S3705 FM Approved CSFM 7300 1653 0234 Line Information Six Isolator Module ULC listed version of ISO 6 Optional cabinet for one or two modules Door Dimen 9.234 23.454 cm wide 9.484 24.089 cm including x 12.218 31.0337 cm high x 0.672 1.7068 cm Backbox Dimensions 9.0 22.860 cm wide 9.25 cm including hinges x 12.0 30.480 cm high x 2.75 cm Chassis Dimensions installed 7.150 18.161 wide overall x 7.312 18.5725 cm high interior overall x 5.4762 cm deep overall Optional cabinet for up to six modules mounted on chassis below Door Dimensions 24.0 60.96 cm x 12.632 32.0852 cm high x 1.25 3.175 cm deep at bottom Backbox Dimensions 24.0 60.96 cm x 12.550 31.877 cm high x 5.218 13.2537 cm deep Chassis mounts up to six modules in a BB 6F cabi 2 3 2015 Page 1 of 2 is a registered trademark of Honeywell International Inc by Honeywell International Inc All rights reserved Unauthorized use this document is strictly prohibited document is not intended to be used for installation purposes We try to keep our product information up to date and accurate cannot cover all specific applications or anticipate all requirements specifications are subject to change without notice more information contact Fire cid 129 Lite Alarms Phone 800 627 3473 FAX 877 699 4105 2 of 2 DF 60845 A cid 129 2 3 2015