Fire-Lite MMF-302-6(A)

MMF 302 6 A Interface Module MMF 302 6 six zone interface module provides an between the intelligent alarm system and a two wire detection zone A common SLC input is used for modules and the initiating device circuits share a common supervisory supply and ground Otherwise each operates independently from the others first module is addressed from 01 to 154 while the remain modules are automatically assigned to the next five higher Provisions are included for disabling a maximum of unused modules All two wire detectors being monitored be two wire compatibility listed with the modules The transmits the status of a zone of two wire detec to the fire alarm control panel Status conditions are as normal open or alarm The interface module the zone of detectors and the connection of the power supply MMF 302 6 module has panel controlled bicolor LED The panel can cause the LEDs to blink latch on or off Six addressable Class B or three addressable Class A initi Removable 12 AWG 3.1 mm to 18 AWG 0.78 mm plug device circuits terminal blocks Status indicators for each point Unused addresses may be disabled Rotary address switches Class A or Class B operation LiteSpeed or CLIP operation Mount one or two modules in a BB 2F cabinet optional Mount up to six modules on a CH 6 chassis in a BB 6F cab optional Mounting hardware included current 2.0 mA SLC current draw with all used if some addresses are disabled the standby decreases current 40 mA assumes all six LEDs solid ON range 32 to 120 0 to 49 10 to 85 noncondensing 6.8 172.72 mm high x 5.8 147.32 mm wide 1.25 31.75 mm deep weight 1.1 lb 0.499 kg including packaging options BB 2F cabinet or BB 6F cabinet with CH chassis gauge 12 AWG 3.1 mm to 18 AWG 0.78 mm is shipped in Class B position Remove shunt Class A operation SLC wiring resistance 40 or 50 ohms panel cid 129 E 910 Devices IDC wiring resistance 25 ohms supply voltage DC voltage 18 28 volts power Ripple voltage 0.1 Vrms maximum External supply 90 mA maximum per address in alarm In Class B 540 mA maximum for all six addresses in alarm In A operation 270 mA maximum for all three addresses in detectors See the Device Compatibility Docu Listings and Approvals listings and approvals apply to the modules specified in document In some cases certain modules or applications not be listed by certain approval agencies or listing may in process Consult factory for latest listing status UL Listed S2424 ULC Listed S2424 MMF 302 6A MEA Listed 385 02 E CSFM 7300 0075 0185 FM Approved Line Information Six zone conventional detector interface module Same as above with ULC Listing Optional cabinet for one or two modules Dimensions 9.234 23.454 cm wide 9.484 24.089 cm including x 12.218 31.0337 cm high x 0.672 1.7068 cm BACKBOX 9.0 22.860 cm wide 9.25 23.495 cm hinges x 12.0 30.480 cm high x 2.75 6.985 cm installed 7.150 18.161 cm wide overall x 7.312 09 28 2013 Page 1 of 2 cm high interior overall x 2.156 5.4762 cm deep Optional cabinet for up to six modules mounted on chassis below Dimensions DOOR 24.0 60.96 cm x 12.632 32.0852 cm high x 1.25 3.175 cm deep at bottom BACKBOX 24.0 60.96 cm wide x 12.550 cm high x 5.218 13.2537 cm deep Chassis mounts up to six modules in a BB 6F cabinet and LiteSpeed are registered trademarks of Honeywell Inc by Honeywell International Inc All rights reserved Unauthorized use this document is strictly prohibited document is not intended to be used for installation purposes We try to keep our product information up to date and accurate cannot cover all specific applications or anticipate all requirements specifications are subject to change without notice more information contact Fire cid 129 Lite Alarms Phone 800 627 3473 FAX 877 699 4105 in the U S A 2 of 2 DF 52356 C1 cid 129 09 28 2013