Fire-Lite ROM-284B60 Product Installation Document

ROM 284B60 Installation Document 53954 A 6 14 11 10 568 supports SCS 8L series smoke control operation required by the Boston Fire This operation differs from standard SCS series operation as described below when used must be approved by the AHJ When a smoke control toggle switch has been moved to a manual state and subsequently returned to the automatic the operation of control points in the switch group will return to automatic mode regardless of the state or automatic of any other switch group When a smoke control switch group is manually switched into manual mode ON or OFF other switch groups with toggle set in the automatic position will continue to operate in automatic mode When the security key is closed off all associated switches will operate in automatic mode regardless of the switch position When the security key switch is closed off the SCS points will follow the control settings their dedicated switch group ON AUTO OFF process verification timers have been changed from 90 seconds to 60 seconds Note end process verification initiate a switch group trouble and an external trouble at the control panel when the expected smoke control is not achieved within the allotted time 60 seconds following rules apply for configuring an SCS system with ROM 284B60 must be installed into an SCS 8L replacing the original ROM chip that comes with the product the instructions in document 15744 SCS 8L can be used for dedicated or non dedicated SCS systems approved by AHJ for the described operation SCS 8L must be configured with a Notifier NFS2 3030 Version 16.0 or higher system An NCA 2 Version 16.0 or higher may also be used but smoke control points must reside on an system not use annunciator points 65 through 96 for CBE lockout i e MODE must be NONE as these points are available when the NFS2 3030 is programmed for FSCS mode