Fire-Lite System Sensor SpectrAlert SP2C Series Ceiling Mount Speaker Strobes

July 8 2004 cid 127 G 400 Audio Visual Devices 15 75 30 95 cd models 177 cd models Fire Sensor SP2C Series Speaker Strobes combine strobe and speaker technology with a design intended for ceiling mount applications SpectrAlert SP2C ceiling speaker combine the low current draw of the ceiling mount strobes with the intelligible fidelity sound qual of the SpectrAlert SP200 Series evacuation speaker Like all SpectrAlert products the SP2C ceiling speaker strobes feature the flexibility to meet wide variety of applications The 24 volt strobe is avail in six different candelas including 177 candela for areas The speaker offers field selectable 25.0 voltage and 1 4 1 2 1 and 2 watt power taps The SP2C Series ceiling speaker strobes a design that is sensitive to the aesthetic demands of applications The round shape maintains a low appearance similar to that of a smoke detector Its curves and design further refine the aesthetics over generic wall ceiling mount designs Yet SpectrAlert shape provides clearly visible identification from angles The SP2C Series ceiling speaker strobes several features to simplify installation By incor the SP200 Series speaker the entire unit may be to a standard 4 x 4 x 2 1 8 10.16 x 10.16 x 5.398 backbox without an extension ring An optional skirt is also available for surface mount applica With SpectrAlert round shape aligning the with the room walls is not necessary always lines up Combines SpectrAlert ceiling mount strobe and speaker for low current draw fidelity sound quality 24 volt models available with 15 15 75 30 75 95 115 177 candela strobes 25.0 and 70.7 volt speaker with four field selectable taps Ceiling specific shape profile and aesthetics Strobe is synchronizable with MDL Sync cid 127 Circuit module Mounts to a 4 x 4 x 2 1 8 10.16 x 10.16 x 5.398 cm without an extension ring Round shape offers greater placement flexibility operating temperature 32 to 120 0 to operating voltage 24 VDC and FWR unfiltered terminals 12 to 18 AWG 3.25 to 0.75 mm voltage range 24 volts 16 33 volts voltage range with Sync cid 127 Circuit module volts 17 33 volts voltage 25.0 or 70.7 volts nominal terminals 12 to 18 AWG 3.25 to 0.75 mm range 400 4,000 Hz NOTE The SP2C Series UL listed from 400 to 4,000 Hz but will provide an output from to 10,000 Hz taps 1 4 1 2 1 and 2 watts 6.8 17.272 cm diameter 4 x 4 x 2 1 8 10.16 x 10.16 x 5.398 cm is a registered trademark and Sync cid 127 Circuit is a of System Sensor Alarms is a Honeywell company document is not intended to be used for installation purposes We try to keep our product up to date and accurate We cannot cover all specific applications or anticipate all All specifications are subject to change without notice more information contact Fire cid 127 Lite Alarms One Fire Lite Place Northford Connecticut 06472 800 627 3473 Toll Free FAX 877 699 4105 07 08 04 Page 1 of 2 SPECIFICATIONS speaker strobe shall be a System Sensor Model listed to UL 1480 and UL 1971 and be ap for fire protective signaling systems Speaker shall capable of operating at 25.0 or 70.7 nominal VRMS and have a frequency range of 400 to 4,000 Hz Speaker have power taps which are selected by shunts The shall comply with the NFPA 72 requirements for signaling appliances flashing at 1 Hz over the entire operating voltage range The strobe light consist of a xenon flash tube and associated lens system Surface Mount Backbox Skirt cid 23 cid 16 cid 26 cid 25 cid 28 cid 16 cid 31 cid 10 cid 25 cid 20 cid 26 cid 19 INFORMATION with CURRENT DRAW No hite R Max Current RMS Max Current RMS Speaker box skirt 2 of 2 DF 52077 cid 127 07 08 04