Fire-Lite Teldat VisorALARM PLUS 2U Installation Manual

2U Manual DM374 I Rev 1.0 2007 1 INTRODUCTION 1 VISORALARM PLUS 2U INTRODUCTION 2 SCENARIO 3 OPERATING MODE 6 Monitoring 6 of Alarms 7 ADDITIONAL FEATURES 9 CONFIGURATION AND MANAGEMENT 10 2 INSTALLATION 11 12 installation conditions 12 14 on the device 17 3 CONFIGURATION 19 20 COMMON CONFIGURATION 21 CHANGING THE IP PROTOCOL CONFIGURATION 25 CONFIGURING THE NTP CLIENT 26 ARLY ALARM RECEPTION INTERFACE 28 Receiver 28 with the Automation Server 30 parameters with the printer 30 with the mIP IPDACTs 31 Backup Parameters 31 Maintenance Receiver 33 Configurable Events 33 pattern 34 operation 37 ADJUSTMENTS 40 EXAMPLE 41 4 APPENDICES 57 TROUBLESHOOTING 58 CONNECTING THE CONNECTORS 59 connections RJ45 59 Connectors 59 Expansion Card Connectors 60 port Connections 61 TECHNICAL SPECIFICATIONS 61 UL COMPLIANCE INSTALLATION 63 prior to installation 63 requirements 64 requirements 65 ALARM PRINTING FORMAT 68 AUTOMATION SOFTWARE 69 formats 69 Software 71 ii 1 VisorALARM PLUS 2U Introduction is a communications IP VisorALARM PLUS 2U receiver Model VisorALARM PLUS 2U developed by Teldat for security environments The IP VisorALARM PLUS 2U receiver task is to receive alarms over an IP network and to subsequently send them to an automation SwAut The functionality of the Teldat VisorALARM PLUS 2U is similar to any other receiver which receives alarms over the telephone line IP VisorALARM PLUS 2U receiver operates together with the IP Module mIP IPDACT which the alarms from the alarm control panels a nd sends them to the Teldat VisorALARM PLUS over an IP network Additionally the Teldat VisorALARM PLUS 2U monitors connectivity with the registered mIP IPDACTs Should connectivity fail then the VisorALARM PLUS 2U generates to the SwAut VisorALARM PLUS 2U IP receiver has the network backup functionality added which permits mIP IPDACT the possibility of IP backup towards another IP receiver The main or primary and the backup receiver are always synchronized at the configuration level VisorALARM PLUS 2U is supplied with a display and a keypad in order to validate the signals and monitor the device The VisorALARM PLUS 2U includes interfaces to connect Software and to a printer user can access to the device configuration through an asynchronous serial data connection by a serial terminal emulator The configuration is a text level and permits the copy paste to an 1 VisorALARM PLUS 2U 2U Receiver Introduction 2 1.0 Installation Scenario traditional security scenario consists of a control panel CP located in the client environment and alarm receiver center ARC located in the security company control center The CP contains a of sensors which trigger a series of alarms or events which when produced are sent to the ARC be processed between the above is traditionally carried out over the telephone line so that both ends initiate a call to the remote end the CP in order to notify events and the ARC for bi directional activation teleloading and general control Panel Telephony Network Receiver SW MAS MicroKey Receiver Center 2 Traditional security scenario communication protocol varies depending on the manufacturers who usually tend to use their own