Fire-Lite UQGS S2517 Heat-automatic Fire Detectors

UQGS S2517 Heat automatic Fire Detectors Quick Guide Contact Us UL com Fire Detectors Fire Detectors Bottom General Information for Heat automatic Fire Detectors ALARMS Fire lite Pl CT 06472 USA Wall or Ft a 47 a 44 a a a a a HD 602 a a HD 604 a 200 12 12 40 PM Heat automatic Fire Detectors a HD 622 a a HD 624 a Model Detector H350R H355 H355R H355HT Unit Restrictions Listing limited to specific system control unit Information on compatible control unit indicated on installation drawing of control and or detector For connection to Listed control units with which compatibility was determined by test or a review of circuit parameters and compatible models indicated on installation wiring diagram for detector base and or control unit Fixed temperature Fixed temperature rate of rise combination The suffix R indicates the addition of a 10 k 5 w resistor in series with the normally open contacts The suffix S indicates the of a 200 k 1 2 w resistor across the normally closed contacts The suffix L indicates the addition of 560 ohm 2 w resistor series with the normally open contacts The Distance between detectors on smooth ceilings with large bays shall not be in excess of ft and distance of detector from any wall or partition not more than 15 ft 50ft and 25ft and 15ft and 7.5ft Black dot surrounded by a white colored ring located in the center of the cover for this temperature rating Electrical ratings Model FR 6 120 v ac 1 amp 6 24 v dc 0.5 amp Models 302 302H 6 125 v ac 5 amp 6 25 v dc 1.0 125 v dc 0.5 amp Models 501 502 503 504 601 602 603 604 621 622 623 624 3 amp 6 125 v ac 1 amp 6 28 v 0.3 amp 125 v dc 0.1 amp 250 v dc Models A AT 6 125 v ac 6 amp 6 28 v dc 3 amp 125 v dc 1 amp 250 v dc 0.3 this page of Use Top Updated on 2017 12 07 2018 UL LLC appearance of a company name or product in this database does not in itself assure that products so identified have been under UL Follow Up Service Only those products bearing the UL Mark should be considered to be Certified and under UL Follow Up Service Always look for the Mark on the product permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions 1 The Information Assemblies Constructions Designs Systems and or Certifications files must be presented in their entirety and a non misleading manner without any manipulation of the data or drawings 2 The statement Reprinted from the Online Directory with permission from UL must appear adjacent to the extracted material In addition the reprinted material include a copyright notice in the following format 2018 UL LLC 12 12 40 PM