System Sensor B110RLP Plug-in Detector Base

I AND MAINTENANCE INSTRUCTIONS 2151 2151A 2151E Plug in Detector Base use with the following smoke detectors US Canada Europe Ratings includes base and detector Installing for Proper Use of System Smoke Detectors which detailed information on detector spacing place zoning wiring and special applications Copies of installations in Canada please refer to CAN4 S524 for the Installation of Fire Alarm Systems and The detector used with this base must be Description B110RLP plug in detector base is used with System model 1151 and 1151A ionization detector heads bases makes them more versatile than equivalent connections The base also contains a resistor to refer to insert for the Limitations of Fire Alarm Systems Limited Warranty alter the obligations or limitations of this Warranty The Company period commencing with the date of manufacture After phoning number send defective units postage prepaid to System Repair Department RA 3825 Ohio Avenue St replace units which are found to be defective because of damage use modifications or alterations occurring after the date manufacture In no case shall the Company be liable for any conse or limitation of incidental or consequential damages so the above or exclusion may not apply to you This Warranty gives you detector base mounts directly to 3 1 2 inch and octagon boxes and 4 inch square boxes with or plaster rings To mount remove decorative ring the screws supplied with the junction box and the mounting slots in the base Place decorative Guidelines Code and the local codes having jurisdiction detectors and alarm system control panels have for allowable loop resistance Consult the panel manufacturer specifications for the total resistance allowed for the particular model control the clamping plate and tightening the clamping Sensor smoke detectors and mounting bases are with a compatibility identifier located as the last 1 Mounting base to box 2 Typical wiring diagram for 2 wire detector systems A OPTIONAL WIRING ON NOT NOT be installed in the bases The shorting spring in the removed from the base DO NOT remove the shorting Feature Do