System Sensor B224RB Plug-in Relay Detector Base INSTALLATION AND MAINTENANCE INSTRUCTIONS

Figure 3A Activating the tamper resist feature 3B Removing the detector head from the base AND MAINTENANCE LEVER TAB AT LINE BY TOWARD OF BASE SMALL BLADED TO PLASTIC LEVER DIRECTION OF Plug in Detector Base Ratings Remarks Installing and the System Smoke Detectors Applications which provide detailed information on detector Information your desired delay B224RB is set at the short de refer to insert for the Limitations of Fire Alarm Systems Limited Warranty Company obligation of this Warranty shall be limited to the replacement of cause of failure The Company shall not be obligated to replace units are found to be defective because of damage unreasonable use modifica or alterations occurring after the date of manufacture In no case shall the Guidelines signal wiring the wiring between interconnected de it is recommended that the wire be no smaller loop resistance Consult the control panel specifica Instructions can cause an unexpected and possibly dangerous of that circuit Therefore do NOT connect an the normally open NO line to terminal 2 see Fig Terminal 6 is for shielded cable only see Figure 2 If 1 Mounting the base to an electrical box 2 Wiring diagram ON NOT NOT PAIR RECOMMENDED INTELLIGENT