System Sensor DH100ACDCP

7.3 Ion Detector Boards or vacuum inside area of cover Chamber may Board Replacement Detector Board Replacement Part No A5190 Remove Pull To replace the board align the board mounting fea Secure Power Board replacement Part No A5064 Disconnect Remove Pull To replace the board align the board mounting fea Secure Re connect Model DH100ACDCP Air Duct Smoke Detector Specifications Specifications See 220 240 Alarm combination refer to insert for the Limitations of Fire Alarm Systems Limited Warranty Sensor warrants its enclosed air duct smoke detector to be free defects in materials and workmanship under normal use and ser no other express warranty for this air duct smoke detector No obligation of this Warranty shall be limited to the repair or System Sensor Returns Department RA 3825 Ohio damage unreasonable use modifications or alterations occurring AND MAINTENANCE INSTRUCTIONS Air Duct Smoke Detector Installing for Proper of Smoke Detectors in Duct Applications A05 1004 provides detailed information on detector spacing this manual are available from System Sensor NFPA following NFPA 72 requirements The detector of Contents 2 General Description DH100ACDCP Air Duct Smoke Detector utilizes technology for the detection of smoke This DH100ACDCP detector is designed to operate on VDC VAC 120 VAC or 240 VAC Alarm and supervi fan shut down These detectors are not designed for detector latches into alarm state when an alarm local alarm indication and optional accessories DH100ACDCP can be reset by a momentary power DH100ACDCP incor a cover tamper feature that