System Sensor M500R

INSTALLATION AND MAINTENANCE INSTRUCTIONS Relay Control Module Installing information is included as a quick reference instal guide Refer to the control panel installation man for detailed system information If the modules will Description M500R Relay Control Module is intended for use in and are rated in accordance with the table in the Circuit connections to the relay contacts are not by the module The module also has a panel LED indicator This module can be used to re Requirements ensure proper operation these modules shall be con M500R mounts directly to 4 square electrical boxes Barrier must be used to meet UL requirements into the barrier and attached to the junction box as 1 Controls and indicators 2A Module mounting with barrier 2B Contact Ratings RATING VOLTAGE DESCRIPTION 3 Relay module wiring diagram LINE CIRCUIT SLC VDC Max PAIR RECOMMENDED MODULES TO LISTED COMPATIBLE PANELS ONLY PANEL OR DEVICE NEXT COMMON 2 CLOSED 2 OPEN 2 COMMON 1 CLOSED 1 OPEN 1 ANY WIRING TO TERMINALS 4 10 IS NONPOWER THE CB500 BARRIER IS REQUIRED THE CB500 A NONPOWER LIMITED LABEL WHICH MUST PLACED OVER THE POWER LIMITED TERMINAL ON THE NAMEPLATE LABEL MODULE DOES NOT SUPERVISE CONTROLLED CIRCUITS ANY FAULT IN THE POWER SUPPLY IS LIMITED TO THAT ZONE AND DOES NOT RESULT IN A FAULT IN A SEPARATE ZONE Limited Warranty Sensor warrants its enclosed product to be free from defects in and workmanship under normal use and service for a period warranty for the enclosed product No agent representative obligations or limitations of this Warranty The Company obliga product which is found to be defective in materials or workman under normal use and service during the three year period com with the date of manufacture After phoning System Sensor free number 800 SENSOR2 736 7672 for a Return Authorization include a note describing the malfunction and suspected cause failure The Company shall not be obligated to replace units which found to be defective because of damage unreasonable use modi or alterations occurring after the date of manufacture In no shall the Company be liable for any consequential or incidental even if the loss or damage is caused by the Company or fault Some states do not allow the exclusion or limita of incidental or consequential damages so the above limitation or may not apply to you This Warranty gives you specific legal