Gamewell-FCI ADAM-6 Auxiliary DC Notification Appliance Module

FC 72 SERIES D C NOTIFICATION MODULE ADAM 6 Auxiliary D C Actuation Module provides FC 72 control panel with two 2 additional fully notification appliance circuits which may be used selectively signal by zone Each circuit is individually at 2 amperes and will accept either Class B Style Y or A Style Z wiring A set of dry Form contacts transfer when an alarm relay is activated If notification appliance circuit is short circuited open grounded it is automatically shown on the corresponding trouble indicator and the system visual and audible indicators BCM 6 TCM 6 or CCM 6 card must be installed in the module for each notification appliance circuit in FCI approved U L Listed polarized notification may be used Consult the Installation Operating P N 9000 0007 for a list of approved appliances output from each notification appliance circuit is ampere B STYLE Y K 1 2 W K 1 2 W K 1 2 W K 1 2 W A STYLE Z CONFIGURATION Cut if TCM 6 CCM 6 is installed in Section A Cut if Section A is NOT to trip Section B Cut if TCM 6 CCM 6 is installed in Section B Cut if BCM 6 TCM 6 CCM 6 is installed in Section B supervision of card removal Cut if ADAM 6 is NOT the last module in the system Cut when using Terminals 10 and 11 to supply power the ADAM 6 module OF TERMINALS SHOWN IN ALARM CONDITION ONLY 24 VDC U L LISTED NOTIFICATION APPLIANCES NOT EXCEED 1.75 A PER OUTPUT CIRCUIT are provided for information only and are believed to be accurate However no responsibility is assumed by Fire Control Instruments Inc for their use subject to change without notice 1997 All Rights Reserved 2nd Ave Waltham MA 02451 1133 USA TEL 781 487 0088 FAX 781 370 4132 1.3