Gamewell-FCI APS-6 Auxiliary Power Supply

DESCRIPTION Model APS 6 is a 24 VDC 4 amp auxiliary power which may be used to provide the FCI system with power when the rated capacity of the main power is exceeded The APS 6 requires 6 x 6 inches 15.24 of cabinet space APS 6 has its own transfer relay which automatically the output to the system standby batteries and a trouble signal if either the AC input or the 24 VDC has been interrupted and is inherently power limited withstand any overload condition Per UL Standard 864 input voltage DC load 4 amp regulation regulation size VAC 60 Hz 2 amp VDC nominal amp peak to peak VAC 3 change output voltage change in output 0 4 amp amp 7AG style batteries OUTPUT LIMITED POWER VAC HZ ONLY RELAY OUTPUT OUTPUT LIMITED POWER SUPPLY AMP 24 VDC 4 Ampere Continuous Output 24 VDC Inherently Power Limited Design Automatic Transfer to System Batteries upon Loss of Power Yellow Indicator Green POWER Indicator Term TB1 1 2 AC power inputs connect to 120 VAC 2A FCI control panel AC terminal block Term 1 Transfer relay control output Power limited Connect to PS 6 Transfer Relay Control Output Term 2 Trouble output Connect to corresponding input Power limited BMFC Term 23 TBZ Terms 1 2 3 4 Term 3 Battery Connect to 24V standby battery power limited Example BMFC Term 43 Term 4 Common Battery Connect to 24V standby Non power limited Example BMFC Term 44 Term 6 B Output Connect to 24 VDC Power input terminal limited Example ADAM Term 11 K1 Transfer relay P N 26592 Transfers the standby batteries the B output when there is no low AC power LED Trouble indicator Lights when K1 transfers standby batteries LED Power On indicator green Lights when supply output is available BATT FUSE Battery fuse 6A 7AG Protects battery are provided for information only and are believed to be accurate However no responsibility is assumed by Fire Control Instruments Inc for their use subject to change without notice 1997 All Rights Reserved 2nd Ave Waltham MA 02451 1133 USA TEL 781 487 0088 FAX 781 370 4132 1.3