Gamewell-FCI ASD-PL2 Photoelectric Detector

ASD PL2 ADDRESSABLE SENSOR FCI Series analog addressable plug smoke sensors with integral communi provide features that surpass con sensors Sensitivity can be pro in the control panel software and continuously monitored and reported to panel Point ID capability allows each address to be set with decade switches providing exact loca for selective maintenance when contamination reaches an unac level The ASD PL2 photo elec sensor unique optical sensing is engineered to sense smoke by a wide range of combustion Dual electronic thermistors add 57 fixed temperature thermal on the ASD PLT2 plug in sensors use a sepa base to simplify installation service maintenance A special tool allows personnel to plug in and re detectors without using a ladder the base on a box which is at 1.5 3.81 cm deep Suitable mount base boxes include 4.0 10.16 cm square box 3.5 8.89 cm or 4.0 10.16 cm oc box base Single gang box except relay or isola With B501BH base use a 4.0 10.16 square box With B224RB or B224BI base use a 8.89 cm octagonal box or a 4.0 cm octagonal or square box Because of the inherent supervi provided by the SLC end of line are not required Wiring branches are permitted for Style 4 wiring Sleek low profile design Analog Addressable communica Stable communication technique noise immunity Low standby current Rotary 01 to 99 address switches Optional remote single gang LED RA400Z Dual LED design provides 360 angle Visible red LEDs flash every time the is polled and light steadily alarm Built in functional test switch by external magnet Optional relay isolator or sounder Listed to UL 268 SPACING recommends spacing sensors in with NFPA 72 In low airflow with smooth ceilings space 30 feet 9.144 m For specific regarding sensor spacing and special applications refer NFPA 72 System Smoke Detector Guide document A05 1003 available at www systemsensor com ISO 9001 Company are provided for information only and not intended to be used for installation purposes are believed to be accurate However no respon is assumed by Fire Control Instruments for their Specifications subject to change without 2003 All Rights Reserved 1.2 1 of 2 2.1 5.1 cm high x 4.1 10.4 cm diameter installed in B501 base 6.1 15.5 cm diameter installed in ADB FL weight 5.2 oz 147 g temperature ASD PL2 0 to 49 32 to 120 ASD PTL2 0 to 38 32 to 100 signal for ASD PTL2 at 45 10 velocity range 0 4000 ft min 1219.2 m min suitable for installation in ducts humidity 10 93 noncondensing ratings fixed temperature setpoint 135 57 SPECIFICATIONS range 15 32 volts DC peak current max avg 250 24 VDC without communication 360 24 VDC one communication 5 seconds with LED enabled current max 6.5 mA 24 VDC AVAILABLE 6.1 15.5 cm diameter 4.1 10.4 cm diameter or B501BHT Sounder base assembly B501BHT produces a temporal pattern Includes B501 base Relay Base Screw terminals up to 14 AWG 2.0 mm Relay type Form C Rating 2.0 A 30 VDC 0.3 A 110 VDC inductive 1.0 A 30 VDC inductive Dimensions 6.2 15.748 cm x 1.2 3.048 cm Isolator Base Dimensions 6.2 15.748 cm x 1.2 3.048 cm Maximum 25 devices between isolator are provided for information only and are not intended to be used for installation purposes and are believed to be accurate no responsibility is assumed by Fire Control Instruments for their use Specifications subject to change without notice 2003 All Rights Reserved Southwest Park Westwood MA 02090 USA cid 127 Tel 781 471 3000 cid 127 Fax 781 471 3099 cid 127 www firecontrolinstruments com Honeywell Company 9020 0559 Ver 1.2 Page 2 of 2 CONTROL INSTRUMENTS