Gamewell-FCI BCM-6A, TCM-6, CCM-6 NAC Modules

FC 72 SERIES TCM 6 CCM 6 APPLIANCE MODULES Notification Appliance Circuit Module Temporal Pattern Coder Module BCM 6A Notification Appliance Circuit Module is as standard equipment in every FC 72 series control Its functions are to supervise the alarm relay and supervision of the notification appliance circuit field for grounds breaks and short circuit conditions a fault occur audible and visual system trouble will be actuated TCM 6 Temporal Coder Module is an optional module can be used to replace the BCM 6 series module in the series control panel In addition to providing all the functions of the BCM 6 series the TCM 6 will the notification appliance circuits in the Temporal Audible Emergency Evacuation Signal per ANSI CCM 6 Common Coder Module is an optional module can also be used in place of the BCM 6 series module addition to providing all the supervisory functions of the series module it gives the FC 72 system the of generating a wide variety of common coded Any repeatable code composed of up to ten 10 pulses may be selected and can be programmed either factory or field level CCM 6 module also provides a field adjustable rate and a selectable field adjustable time limit The pulse duration is 0.25 second to 1.5 seconds at 50 duty cycle When adjusting time limit cutoff the common alarm signal shall be of not less than three rounds in order to comply with the National Fire Alarm NFPA 72 INFORMATION No Model BCM 6A TCM 6 CCM 6 Appliance Module Code Module Coder Module Common Coder Module are provided for information only and are believed to be accurate However no responsibility is assumed by Fire Control Instruments Inc for their use subject to change without notice 1997 All Rights Reserved 2nd Ave Waltham MA 02451 1133 USA TEL 781 487 0088 FAX 781 370 4132 1.3