Gamewell-FCI DSU Dual Singnal Unit

7200 SERIES SIGNAL UNIT Dual Signal Unit DSU provides the 7200 Series fire alarm control panel with a four 4 ampere auxiliary power supply addition to two 2 notification appliance circuits The notification appliance circuits may be configured as Class A Style Z Class B Style Y The notification appliance circuits are overcurrent protected and may be individually programmed to op in response to alarms from any initiating circuit addressable initiating device or group of circuits notification appliance circuits provide 1.75 amperes each The auxiliary power output is likewise 1.75 amperes with to power for all circuits combined not to exceed four 4 amperes The auxiliary power output is jumper configurable as or non resettable terminal block is provided for the connection of all circuits This terminal block will accommodate wire sizes up 12 AWG Dual Signal Unit DSU is a full size unit It contains an addressing switch and a OFF disconnect switch each notification appliance circuit LEDs mounted on the DSU include POWER POWER NOTIFICATION 1 NOTIFICATION 2 FAULT that AC input is present that power supply is functioning trouble in Notification Appl Circuit 1 trouble in Notification Appl Circuit 2 low or missing battery INFORMATION current current Input appliance circuit output power output amp amp VAC 50 60 Hz 2 amp VAC 50 60 Hz 1 amp amps circuit amps 24 VDC INFORMATION No Signal Unit 120 240 VAC Order separately are provided for information only are not intended to be used for installation purposes and are believed to be accurate However no responsibility is assumed Fire Control Instruments Inc for their use Specifications subject to change without notice 1997 All Rights Reserved Southwest Park Westwood MA 02090 USA TEL 781 471 3000 FAX 781 471 3099 ISO 9001 Certified Company 1.6