Gamewell-FCI Gamewell Manual Pull Station

File Preview
File Preview
Click below to download for free

File Data

Name gamewell-fci-gamewell-manual-pull-station-2659048137.pdf
Type PDF
Size 608.74 KB
Downloads

Text Preview

GWMPS Series Manual Fire Alarm Stations 1 GWMPS 1T Action 2 GWMPS 2 Action Complies with UL Standard S281 ADA compliant Offers single or dual action configurations Provides terminal strip connections Allows you to reset using the same keys as a enclosures surface mount backboxes available Designed with high gloss red enamel finish on die cast Constructed of corrosion resistant gold plated contacts Information Number Description Station Single Action Terminals Station Double Action Terminals Station Backbox of 12 acrylic break rods GWMPS Series manual pull stations feature high die cast metal construction They are available in single or dual action configurations with SPST and terminal strip connections The normally open which closes when the pull station is activated is for 1 amp at 125 VAC or 30 VDC The contacts are to avoid risk of corrosion All models in the have been tested by UL for compliance to the latest of the Americans with Disabilities Act ADA Action Pull Station operate the single action pull station do the following On the front of the pull station pull the handle down until the handle locks into place sure it is easily visible from up to 50 ft To reset the pull handle insert the key to open the pull Place the handle in the normal upright position and the pull station A scored acrylic break rod is also supplied with each for applications where it is necessary Action Pull Station operate the dual action pull station do the following On the front of the pull station push the PUSH bar so it rotates inward and allows you to grasp the pull in a one handed motion To reset the pull handle insert the key to open the pull the pull station Place the handle in the normal upright position and re The dual action models are also supplied with break Rating Station amp at 125 VAC or 30 VDC 3 4 H x 3 1 4 W x 1 1 8 D H x 8.2 W x 2.9 D cm Mount Dimensions 4 3 4 H x 3 1 4 W x 2 1 4 D and sheet metal H x 8.2 W x 5.7 D cm with raised white letters PULL bar with raised red models are supplied with one acrylic break rod and PK625 key GAMEWELL FCI are for information only are not intended for installation purposes and are subject to change without notice No responsibility is assumed by Gamewell FCI for their use Clintonville Road Northford CT 06472 1610 USA Tel 203 484 7161 Fax 203 484 7118 by Honeywell International Inc All rights reserved www gamewell fci com 9021 60914 Rev B page 1 of 1

Related Files