Gamewell-FCI ILI-E3 Series Intelligent Loop Interface-Main Board

ILI E3 SERIES Loop Interface Main Board ILI E3 Series is the main board interface with the E3 Series System Intelligent Loop Interface Main Board is the main interface for the E3 product line With its state of the art bit RISC processor this compact on board provides a powerful addition to the The ILI E3 Series is used in the systems E3 Series Expandable Emergency addition the Addressable Node Expander board expands the network to 122 When this sub assembly is integrated proven Broadband components the is a flexible yet powerful integrated solution When the system transmits to locations the optional RPT E3 UTP the ILI MB E3 with valuable signal and transient protection as well as using both wire and fiber optic ILI MB E3 provides two signaling line and terminals for the connections to to 159 detectors 159 modules and 159 sounder bases per SLC mode In CLIP mode each SLC 99 detectors and 99 modules The interface can support a variety of devices ILI MB E3 relay outputs include system supervisory and system The ILI MB E3 provides output for a energy city master box or remote location is non power limited All other wiring is 2 power limited X wiring requires the use of the System M500X Isolator Modules System E3 Series Combined Fire and Mass System E3 Series Broadband Voice Command intuitive design provides the following two signaling line circuits auxiliary power output local energy city box output auxiliary relay functions two notification application circuits features combined with the built in and the serial protocols allow this to support a host of new and existing a building block to the fire alarm control panel ILI MB E3 is network ready and occupies of 64 nodes operating at 625K baud AND BENEFITS Listed under UL Standard 864 10th Edition Listed under UL Standard UL2572 2nd for Mass Notification UL Listed and FM Approved for Pre Action and Agent Releasing Provides signaling line circuits with the 2 Class A Class X or Class B circuits 40 Character user defined text per device ILI S E3 Offers a capacity of 159 sensors 159 Only modules and 159 addressable bases per circuit Includes 8100 Event History Log Uses a network ready integral 625K baud Supports 115.2K baud RS 232 Automatically adjusts to any NAC End of Resistor EOL value 1k 55k ohm for audible visual appliances Two notification appliance circuits Class Class B rated at 2.0 amps per circuit Offers an RS 485 supporting 16 ASM 16 modules and or ANU 48 LED driver Intelligent Loop Interface Expansion Board ILI S E3 provides E3 Series control panel with two additional electrically isolated line circuits The layout is similar to the ILI MB E3 except a of components are omitted The ILI S E3 occupies one node the Broadband network The ILI S E3 provides two signaling line and terminals for the connections to up to 159 detectors 159 and 159 addressable sounder bases per SLC in Velociti mode CLIP mode each SLC supports 99 detectors and 99 modules the ILI MB E3 or ILI S E3 can be mounted in the following E3 cabinets Cabinet B Backbox instructions on the installation of the ILI MB E3 or ILI S E3 refer to following documents E3 Series Expandable Emergency Evacuation Manual Number LS10080 051GF E ILI MB E3 Installation Instructions Part Number 9000 0579 ILI S E3 Installation Instructions Part Number 9000 0569 information on the ILI95 MB E3 and ILI95 S E3 refer to the Series Data Sheet Part Number 9021 60336 information on the ANX refer to the ANX Data Sheet Number 9021 60497 INFORMATION Intelligent Loop Interface Main Board Intelligent Loop Interface Expansion Board B Slim E3 Cabinet C Backbox E3 ILI CPLATE E3 INCC CPLATE E3 INX CPLATE Cabinet D Backbox E3 INCC DPlate E3 INX DPLATE 2 of 3 9020 0605 R SERIES TECHNICAL SPECIFICATIONS ILI E3 Series are designed to comply with following standards Standards UL 864 10th Edition UL 2572 2nd for Mass Notification LISTINGS AND APPROVALS listings and approvals apply to the specified in this document In cases certain modules or applica may not be listed by certain approval or listing may be in process Con the factory for the latest listing status Listed S1869 UL 864 10th Edition 2572 2nd Edition for Mass Notification Approved 3025415 FDNY COA 6077 7165 1703 0125 of Chicago Class 1 Class 2 and High Rise of Denver 9001 Certification Series Velociti Series and are registered of Honeywell Inc is a registered trademark of Laboratories Inc document is not intended to be for installation purposes We to keep our product information and accurate We cannot all specific applications or all requirements All are subject to change notice of origin U S A only Operating Current 0.081 amp Alarm Current 0.150 amp max Operating Current 0.118 amp Alarm Current 0.119 amp and ILI S E3 Voltage 24 VDC FWR the PM 9 PM 9G Power Supply Temperature 32 to 120 F to 49 C Humidity 0 to 93 at 90 F 32 C 2 Power Limited 40 Ohms maximum line impedance 0.5 uF line capacitance AND HUMIDITY RANGES system meets NFPA requirements for at 0 49 120 and at a humidity 93 2 RH noncondensing 32 2 90 3 However the useful of the system s standby batteries and the components may be adversely by extreme temperature ranges and Therefore it is recommended that this and its peripherals be installed in an with a normal room temperature of 27 80 Gamewell FCI Clintonville Road CT 06472 1610 R 06 20 Honeywell International Inc