Gamewell-FCI IPDACT-2 IP Fire Alarm Communicator

Analog and Networking Systems Fire Alarm Communicator IPDACT 2 is a compact Internet Protocol Digital Alarm Communicator Module It is designed to transmit status communication to a Central via the Internet During an alarm a supervisory or a trouble event the IPDACT using the Contact ID protocol from the fire alarm control panel The standard DACT communication is then converted to a highly encrypted Ethernet UDP packet then transmitted and received via the Internet to a compatible receiver at the Station It can also test the connectivity between the fire alarm control panel the Central Station These features enable seamless integration into existing Central Station architectures IPDACT 2 operates in conjunction with the VisorALARM PLUS IP receiver at the Central Station The IPDACT 2 is designed to operate with Gamewell E3 Series and GF505 GF510 Flex Series Systems The IP Communicator faster and more economic digital alarm transmissions improving response and decreasing costs found with traditional analog systems The IPDACT 2 value added features such as supervised line functionality which allows a Station to detect any off line alarm panels within seconds No backup analog line is necessary However customers can still use a traditional backup phone from the panel second phone port if desired BENEFITS Listed under UL 864 9th Operates with the E3 panels equipped DACT E3 units GF505 GF510 Series Systems Saves the cost of two phone lines the customer IP equipment is Provides compatibility newer low cost non digital services as cable or fiber Increases connection to the Station from once a day test to once every 90 Produces fast alarm less than second time Requires no change to existing panel The IP directly to the and secondary panel telephone Performs over any type customer provided 10 100Base network LAN or DSL modem or modem Transmits data over Contact ID but is secured the industry level of AES 512 Supports both dynamic or Public and Static IP Maintains dual IP receiver for high all are sent to a address the primary unavailable Offers user UDP for flexibility and with and other security install the IDPDACT 2 the following criteria are Mounted locally next to the supported fire alarm panel The Central Station must be equipped with a VisorALARM PLUS IP receiver At least 136mA of electrical power available from the supply to use for the IPDACT 2 unit pre program the IP Communicator the following are required to be done An auto registration password is entered along all other Central Station information and in the unit flash memory When the IP Communicator is installed at the and connected to the Internet Intranet it with the Central Station receiver This feature eliminates the need to program a PC at the remote site Ethernet network connection ITE listed router The IP Receiver at the monitoring station will It is recommended to use a small UPS to provide power for customer provided router Dynamic or static IP address dynamic addressing DHCP server present on the local network configure other parameters registration most installations the only parameters required as follows Selection of either DHCP or Static IP Destination primary and secondary receiver IP DSL and cable modems typically use dynamic as supplied by network providers Account identification number CID Port number UDP port for IP communication with the monitoring Installation password Information IP communicator Includes configuration manuals and prepared 30 telephone cable connection to panel DACT telco ports External mounting enclosure consisting of bracket IPBRKT and screws Enclosure must close nipple to a panel no further than 6 in 15 via conduit Red Y adapter option to allow connection of both dialer outputs to one cable input to IPDACT IPSPLT is not required if the second dialer output is for the phone backup Serial programming cable and DB9 IP Receiver with LCD display and default port 80 may be changed by the Station Destination IP addresses of the IP receivers where IP Communicator will be sending alarms and events If installed on a private Intranet the address of the public router will be required allow the IP card to access the Internet and the router at the Central Station Panel account ID number CID Installer password provided by the monitoring managing the IP receiver Options configure the IPDACT 2 the following three options available Use a Hyper Terminal or Tera Term software program Local or Remote Telnet session via an Ethernet Windows configuration software shipped the IP Communicator It is possible to pre program the IP at the panel before the installation Technical Specifications Voltage 24VDC Temperature Not to exceed the range of to 120 0 to 49 Humidity Not to exceed 93 at 90 32 AND HUMIDITY RANGES system meets NFPA requirements for operation at 0 49 120 and at a relative humidity 93 2 non condensing at 32 2 90 3 the useful life of the system standby batteries the electronic components may be adversely affected extreme temperature ranges and humidity Therefore it recommended that this system and its peripherals be in an environment with a normal room of 15 27 80 IPDACT 2 is designed to comply with the following Standard UL 864 9th Edition LISTINGS AND APPROVALS listings and approvals apply to the modules in this document In some cases certain or applications may not be listed by certain agencies or listing may be in process Consult factory for the latest listing status Listed S1869 7165 1703 0125 Approved FDNY COA 6077 9001 Certification a complete listing of all approvals and please visit Series and Gamewell FCI registered trademarks of International Inc and Windows are trademarks of Corporation PLUS is a of Teldat is a registered trademark Underwriters Laboratories document is not intended be used for installation We try to keep our information up to and accurate We cannot all specific applications anticipate all requirements specifications are subject to without notice more information more about Gamewell FCI IPDACT 2 and other products by visiting www Gamewell FCI com Gamewell FCI Clintonville Road CT 06472 1610 F 09 17 Honeywell International Inc