Gamewell-FCI M46-L Series Conventional Pull Station

M46 L Series Fire Alarm Pull Stations Series Compact aesthetic design highly visible color contoured shape and light textured finish Meets with ADA 5 lb maximum pull force Complies with UL Standard 38 for manually acuated boxes Easily operated single or dual action yet designed to false alarms when bumped shaken or jarred Push In Pull Down handle latches in the down position clearly indicate the station was operated The word appears in bright yellow on top of handle indicating the station was operated and the of the station Operation handle engraved with white down arrows to the direction to pull the handle Braille text imprinted on the finger hold area of the oper handle and across the top of the handle Multiple hex and key lock models available U S patent pending hex lock needs only a quarter to lock unlock Station can be opened for inspection maintenance initiating an alarm Product ID label is visible when opening the cover label made of a durable long life material The terms and are molded into plastic adjacent to the alarm switch located inside ISO 9000 2000 Company Gamewell FCI M46 L Series is a cost effective fea series of non coded manual fire alarm pull sta It was designed to meet multiple applications used the installer and end user The M46 L Series features a of models including single and dual action M46 L Series provides conventional Fire Alarm Con Panels FACPs such as the Flex 400 Series with an initiating input signal Its innovative design durable and multiple mounting options make the Series simple to install maintain and operate M46 L manual pull stations provide a textured finger area that includes Braille text In addition the terms and PULL DOWN are labeled on the station han and down arrows are engraved to show the direction operate the station handle activate the normally open alarm switch push in and pull down on the handle When the handle is latched the down position the word appears in yellow at the top of the handle reset the station do the following Twist clockwise one quarter turn Open the station front cover causing the spring the key or hex model dependent operation handle to return to its original To reset the alarm switch to normal non alarm position or close the station front cover switch is automatically reset Cover backplate and operation handle are all molded of polycarbonate material Cover features white lettering and trim Red color matches System Sensor popular Horn Strobe Series is a trademark of Honeywell International Inc is a registered trademark of Underwriter Laboratories Inc is a registered trademark of GE Plastics a subsidiary of General Electric are for information only are not intended for installation purposes and are subject to change without notice No responsibility is assumed by Gamewell FCI for their use Clintonville Road Northford CT 06472 1610 USA Tel 203 484 7161 Fax 203 484 7118 by Honeywell International Inc All rights reserved Rev A page 1 of 2 Specifications Continued Fire Alarm Stations shall be non code with a key hex operated reset lock in order that they may be and so designed that after actual emergency oper they cannot be restored to normal except by use of a or hex An operated station shall automatically condi itself so as to be visually detected as activated stations shall be constructed of red colored or polycarbonate equivalent with clearly visible instructions provided on the cover The word shall appear on the front of the stations in white let 1.00 inches 2.54 cm or larger Stations shall be suit for the following surface mounting on matching backbox SB I 0 semi flush mounting on a standard single gang double or 4.0 10.16 cm square electrical box stations shall be installed in compliance with the with Disabilities Act ADA or per national and requirements Manual stations shall be Listed with Laboratories Specifications Ratings Gold plated 0.25 A 30 VAC or VDC Circuit 3 4 NBG 12LA to 3.0 30 VAC or VDC Specifications H x 4.12 W x 1.4 D H x 10.47 W x 3.5 D cm H x 4.3 W x 1.4 D H x 10.47 W x 3.5 D cm H x 4.7 W x 2 D H x 11.9 W x 5.08 cm Four position terminal strip molded into backplate Terminal strip includes Phillips combination head cap 8 32 screws for easy connection to Initiating Device IDC Terminal screws backed out at factory and shipped to accept field wiring up to 12 AWG 3.25 mm Switch contacts are normally open Can be surface mounted with SB I O or semi flush Semi flush mount to a standard single gang or 4 10.16 cm square electrical box Backplate is large enough to overlap a single gang cutout by 1 2 1.27 cm Optional trim ring BG TR Models packaged in attractive clear plastic PVC packages Packaging includes a cut dust paint cover in shape of pull station Information Number Description pull station single with key pull station dual with key pull station on door with key no pull station on door with key backbox backbox Rev A page 2 of 2 Clintonville Road Northford CT 06472 1610 USA Tel 203 484 7161 Fax 203 484 7118