Gamewell-FCI MMO-6RF Multi-Mod - 6 Relay Output

Addressable Devices Series MMO 6RF Relay Output Module Gamewell FCI Velociti Series multi mod six relay output module MMO 6RF six Form control relay outputs on one board Its compact design affords of installation while using a minimum of wall space Velociti Series use a communication protocol that substantially increases the of communication between the sensors and certain Gamewell FCI analog fire alarm controls These devices operate in a grouped fashion If one of devices in the group has a status change the panel microprocessor stops the poll and concentrates on the single device The net effect is response speed up five times greater than earlier designs MMO 6RF connects to the signaling line circuit SLC of the Gamewell FCI addressable series fire alarm control panels Each relay circuit on the MMO occupies its own address on the control panel SLC and can be programmed to to its own individual control by event sequence of operation The address of first relay is set by a pair of rotary code switches on the MMO 6RF Each remaining circuit is automatically assigned to its own subsequent address MMO 6RF module includes an address disable switch that allows one two or addresses to be turned off to free these addresses for other purposes relay has its own status LED that flashes to indicate proper polling and lights when the circuit has been activated multi mod series units can be mounted in one MBB 2 cabinet Additional mounting options include the MCH 6 chassis that can six multi mod series modules The MCH 6 chassis can be installed in custom cabinets or mounted in the MBB 6 cabinet multi mod series is suitable for use in applications where the centralized location of circuits is required As many as thirty six Form may be located in a cabinet that is only 12.63 H x 24 W x 6.5 D in dimensions This feature saves valuable wall space in mechanical and electrical closets as well as reduces the cost of the installation Information Multi mod relay output Backbox 2 unit Backbox 6 unit requires MCH 6 6 Unit mounting chassis BENEFITS Each module provides Terminal blocks can Offers a wide range of Suitable for retrofit Contains two mounting individually individually form relays Includes removable terminal blocks allow ease of and 12 to 18 wire Provides a flexible configuration that allows up three relay to be ratings Designed for Ideal for applications analog series fire control panels Displays individual indicators as elevator AHU door holder or similar requiring relay outputs available for MBB 2 cabinet six MBB 6 cabinet Only the red LED is in panels that not operate in mode Series MMO 6RF Technical Specifications Velociti Series MMO 6RF is designed to comply with following standard Standard UL 864 9th Edition LISTINGS AND APPROVALS listings and approvals apply to the modules in this document In some cases certain or applications may not be listed by certain agencies or listing may be in process factory for latest listing status S1913 3023594 FDNY 219 02 E Vol VI 7300 1703 0124 9001 Certification a complete listing of all approvals and please visit E3 Series and are registered of Honeywell Inc is a registered trademark Underwriter Laboratories document is not intended be used for installation We try to keep our information up to and accurate We cannot all specific applications anticipate all requirements specifications are subject to without notice Voltage 15 32 VDC Current 1.45 mA Current 32 mA with all six relays activated and all LEDs lit Current 30 mA relay pulse Contact Ratings See Table 1 F to 120 F 0 to 49 C Range 10 to 85 non condensing 6.8 H x 5.8 W x 1.0 D 17.3 x 14.7 x 2.5 cm 12.25 H x 9.25 W x 3.32 D 31.1 x 23.5 x 8.4 cm 12.63 H x 24 W x 6.5 D 32.1 x 60.1 x 16.5 cm Description VDC VDC VDC VDC VDC VAC VAC VAC L R 2ms Coded L R 5ms Coded PF 0.35 Non coded PF 0.35 Non coded 1 Contact Ratings AND HUMIDITY RANGES system meets NFPA requirements for operation at 0 49 120 and at a relative humidity 93 2 noncondensing at 32 2 90 3 the useful life of the system s standby batteries the electronic components may be adversely affected extreme temperature ranges and humidity Therefore is recommended that this system and its peripherals be in an environment with a normal room of 15 27 80 more information more about Gamewell FCI Velociti Series MMO 6RF other products available by visiting www Gamewell FCI com Gamewell FCI Clintonville Road CT 06472 1610 D 11 17 Honeywell International Inc