Gamewell-FCI MPS-8, APS-8, Power Supply

600 Series and APS 8 Series Power Supplies Main Power Supply 8.0 A power supply 4.0 A system power 4.0 A signaling power Standard with IF632 and IF650 FACPs Supervised and controlled by the main FACP CPU ADA inrush tolerant design 60 AH battery charging capacity Automatic high rate charger or APS632 8 Auxiliary Power Supply 8.0 A auxiliary power supply Provides 24 VDC signal or auxiliary power ADA inrush tolerant design 632 and IdentiFlex 650 systems support an number of auxiliary power supplies 600 Series power supplies the MPS 8 the APS 8 have been developed for today critical requirements that demand high efficiency and out reliability The extensive use of audio visual for ADA signaling and UL 1971 notification appli has increased the amount of power the fire alarm panel FACP must supply The MPS 8 and APS 8 that power with margins to spare The MPS 8 Main Supply is controlled by the FACP microprocessor to adequate voltage levels and output current The can accommodate an additional MPS 8 expansion required if greater system power or battery charg is required APS 8 is an Auxiliary Power Supply specifically to provide 8.0 amps of 24 VDC signaling or auxil power to the system APS 8 power supplies may be to a system as required The APS 8 does not con to the MPU bus directly so it does not impact the num of input or output modules that may be added to the The APS632 8 is similar to the APS 8 the is designed to fit into the IF632 expansion CAB632 4 MPS 8 and connected batteries are supervised the FACP CPU In the event of loss of either main or battery power the FACP CPU will report the trouble the operator display The MPS 8 also provides brown detection for the system standard battery charger on the MPS 8 is capable of up to 60 AH batteries APS 8 auxiliary power supply is monitored through its to output modules such as the Universal Signal USM Battery standby power for the APS 8 is through a connection at the MPS 8 The MPS 8 the main CPU manages the secondary power source are for information only are not intended for installation purposes and are subject to change without notice No responsibility is assumed by Gamewell FCI for their use Clintonville Road Northford CT 06472 1610 USA Tel 203 484 7161 Fax 203 484 7118 Honeywell International Inc All rights reserved Rev B page 1 of 2 ISO 9000 2000 Company MEA Input Input VAC VDC nominal 24 VDC nominal Information Number Description power supply 8.0A 24 VDC with lead acid battery charger power supply 8.0A 24 VDC for IF650 FACPs power supply 8.0A 24 VDC for IF632 FACPs 2 per cabinet Applications MPS 8 is the Main Power Supply for the IF632 and FACPs The MPS 8 provides 4.0 amps for system and 4.0 amps for signal power The MPS 8 also pro power monitoring and battery charging capabilities the system APS 8 is used whenever additional signal power or 24 auxiliary power is required The APS 8 connects to the USM signal module to simplify system design installation An unlimited number of APS 8 power sup may be added to a system without affecting system capacity Specifications Fire Alarm System shall be provided with an integral amp power supply The power supply shall be fully and shall monitor for the presence of main AC as well as battery power The Main Power Supply also monitor for low no battery and brownout condi The Main Power Supply shall be capable of charging AH batteries and shall be equipped with automatic high circuitry The Main Power Supply shall be Gamewell Model MPS 8 power supplies shall be supplied as required to all signals and auxiliary devices The Auxiliary Supply shall provide 8.0 amp of full wave rectified Provisions shall be made on the Auxiliary Power for battery backup as required The Auxiliary Power shall be Gamewell FCI Model APS 8 or APS632 Rev B page 2 of 2 Clintonville Road Northford CT 06472 1610 USA Tel 203 484 7161 Fax 203 484 7118