Gamewell-FCI RAN-400 Remote Annunciator

Conventional Control Panels Annunciator RAN 400 is the remote annunciator used with the Flex 410 Fire Alarm Control FACP The RAN 400 performs all system operations It also displays the and the alarm information In addition you can use the RAN 400 for remote the system is in a normal condition and receiving AC power the power LED is and all other LEDs are OFF Other LEDs turn on as the conditions occur access the fire alarm control panel the user enters a code on the annunciator the user presses a button the annunciator piezo beeps and the LCD prompts user to enter a code or other relevant information addition the fire alarm control panel can simultaneously support multiple Specifications contractor shall furnish and install where indicated on the plans the RAN 400 Annunciator The Module shall be of an LCD type with a 2 x 16 display The Annunciator shall be used for remote programming It shall also provide trouble information as well as provide the functions to reset alarms and silence and alarm conditions The Module ID shall be programmed with a four DIP The fire alarm control panel shall be capable of supporting up to four RAN 400s The Module shall be designed to mount on a dual gang box with 18 AWG 0.821 mm to 14 AWG 2.08 mm wire Information Remote annunciator for FLEX 410 FACP RAN 400 BENEFITS Includes a two line 16 LCD display Indicates the following with LEDs the LCD display Trouble Supervisory Alarm System Status Each RAN 400 is Offers wiring from up to Designed to operate Supports up to four supervised the FLEX 410 FACP ft 457.20 m the FACP appear to the fire control panel annunciator per each FACP Technical Specifications SPECIFICATIONS voltage 24 VDC draw 30 mA 50 mA Temperature 32 to 120 0 to 49 Wiring Distance 1500 ft 457.20 m 7.188 18.26 cm 5.0 12.7 cm 1.125 2.86 cm AND HUMIDITY RANGES system meets NFPA requirements for operation at 0 120 and at a relative humidity 93 2 non condensing at 32 2 90 3 the useful life of the system s standby batteries the electronic components may be adversely affected extreme temperature ranges and humidity Therefore it recommended that this system and its peripherals be in an environment with a normal room of 15 27 80 RAN 400 panel is designed to comply with the standard Standard S521 LISTINGS AND APPROVALS listings and approvals apply to the modules in this document In some cases certain or applications may not be listed by certain agencies or listing may be in process factory for latest listing status S521 7165 1703 0162 9001 Certification is a registered of Honeywell Inc is a registered trademark Underwriter Laboratories document is not intended be used for installation We try to keep our information up to and accurate We cannot all specific applications anticipate all requirements specifications are subject to without notice of origin U S A Gamewell FCI Clintonville Road CT 06472 1610 C 10 18 Honeywell International Inc