Gamewell-FCI RAN-7100 Remote Annunciator

RAN 7100 Alphanumeric Annunciator Listed under UL Standard 864 9th Edition Provides a full complement of function keys and LEDs an 80 character alphanumeric LCD display in a remote location up to 3,000 feet 914.4 m from the main control panel Up to five annunciators can be used with the 7100 E3 and S3 Series panels Connects as a surface or flush mount in the RAN2 BB Designed for retrofitting Gamewell RAN annunciators to installed in the 7100 Series E3 Series or S3 Series Offers a compact attractive design Information Number Remote Serial LCD Display Key Display Key or flush backbox for RAN 7100 separately 7165 1703 0125 Gamewell FCI Remote Alphanumeric Annunciator display is a remote annunciator This adapt remote display can be used for installations in the fol modular systems E3 Series Expandable Emergency Evacuation System S3 Series Small Addressable Fire Alarm Control Panel 7100 Series System features an 80 character display which duplicates all the on the main display with the exception of the The 7100 E3 Series and S3 Series control panels accommodate up to five remote RAN 7100 annuncia In addition the RAN 7100 can be surface or flush in the RAN 7100 backbox and installed 3,000 914.4 m away from the main control panel The RAN is also a retrofit solution for the Gamewell Legacy annunciators This feature offers you the option use the RAN 7100 to upgrade to a 7100 an E3 Series an S3 Series System RAN 7100 contains the following function keys Alarm Acknowledge Trouble Acknowledge Signal Silence keylock must be placed in the position to enable function keys with the exception of the key which is used to silence the trouble on the RAN 7100 LEDs on the RAN 7100 are listed as follows System Silenced Alarm NAC 1 Silenced Supervisory System Trouble NAC 2 Silenced Power Fault RAN 7100 can be surface or flush mounted on a stan four gang electrical box and installed up to 3,000 feet m away from the main control panel Voltage Current Current Maximum Temperature Humidity System Reset Lamp Test System Drill Test VDC nominal amp amp to 120 F 0 to 49 C to 93 max non con at 90 F 32 C W x 5 1 4 H x 2 7 16 D W x 13.3 H x 6.9 D cm Series is a registered trademark of Honeywell International Inc is a registered trademark of Underwriter Laboratories Inc GAMEWELL FCI are for information only are not intended for installation purposes and are subject to change without notice No responsibility is assumed by Gamewell FCI for their use by Honeywell International Inc All rights reserved www gamewell fci com 9021 60693 Rev E page 1 of 1 Clintonville Road Northford CT 06472 1610 USA Tel 203 484 7161 Fax 203 484 7118