Gamewell-FCI RAN2 RAN2-RC
File Preview
Click below to download for free
Click below to download for free
File Data
Name | gamewell-fci-ran2-ran2-rc-2143986075.pdf |
---|---|
Type | |
Size | 1.36 MB |
Downloads |
Text Preview
600 Series Series Series Series Annunciators Annunciators Annunciators Annunciators Series RAN2 RAN2 RC Models 600 Series Remote Annunciators RAN2 and RAN2 provide remote display and control capabilities Each device is connected to the main 600 Series Fire Control Panel FACP via a serial communications The RAN interprets the instructions from the main initiating a programmed response and retransmit the instructions to the next device 600 Series Systems can accommodate up 64 devices connected to the serial communications port addition to the Remote Annunciator RAN2 these include Serial Annunciator drives SAN and Printer Interfaces RPI These devices comprise Gamewell FCI Status Control Network Each device its own microprocessor and can be programmed A network of devices can be programmed from a single device saving valuable installation Remote Alphanumeric Display RAN2 is fully super and includes dual serial ports for network connection RAN2 model displays the user text from the main sys The remote control version RAN2 RC includes the seven switches Remote Acknowledge Reset Signal Silence Lamp Test Display 1st Event Display Next Event Display Previous Event basic RAN2 model includes a scroll switch only The switch is used to review multiple events on the sys The remote control versions are provided with a switch bank and eight LEDs for system The switches provide remote control of the system A key switch enables and disables the to prevent unauthorized operation Status Control Network is connected to the main 600 control panel via an RS 232 data communications The SIM 232 module is used to provide an isolated output from the main CPU of the IF632 IF654 and FACPs The IF602 and IF610 have a built in RS 232 is a registered trademark of Underwriters Laboratories Inc RAN2 RC Listed per ANSI UL Standard 864 9th Edition Backlit LCD alphanumeric display 4 lines by panel Up to 64 devices supported on a single 600 Series Field programming via PC Dual optically isolated serial ports Microprocessor controlled Supervised Allows remote system control Surface mount and flush mount models available Adjustable viewing angle Network monitoring capabilities ISO 9000 2000 Company are for information only are not intended for installation purposes and are subject to change without notice No responsibility is assumed by Gamewell FCI for their use Honeywell International Inc All rights reserved Rev B page 1 of 2 Clintonville Road Northford CT 06472 1610 USA Tel 203 484 7161 Fax 203 484 7118 alphanumerics are ideal wherever text based of system activity is required Since the RAN also control system activity there is no additional hard required to complete a status and command center a system of any size Specifications annunciation and control for the main control panel be supplied where indicated Remote annunciation control shall be accomplished via the RS 232 data line It shall be possible to add up to 64 to the communication line It shall be possible to serial annunciators printers and LCD alphanumeric on a single line without the need for special soft Devices shall not be placement sensitive All devices be individually field programmable and independent each other The device shall be identified with part numbers Power Current Current Humidity Xon Xoff VDC normal backlight off plus external load F to 120 F 0 C to 49 C non condensing baud non parity 8 data bits stop bit Mount S 5.125 H x 9.875 W mount H x 25.083 W cm H x 10.875 W H x 27.623 W cm RAN2 BB 5.25 H x 10.10 W x 2.44 D H x 25.654 W x 6.198 D cm Information Number Description annunciator surface mount x 40 character alphanumeric display annunciator flush mount x 40 character alphanumeric display Remote annunciator surface mount x 40 character alphanumeric display remote control Remote annunciator flush mount x 40 character alphanumeric display remote control interface module mounts in 600 Series control IF632 IF654 IF658 to RS 232 outputs required for IF602 and IF610 systems cable via PC based This program is only available to Authorized Distributors Rev B page 2 of 2 Clintonville Road Northford CT 06472 1610 USA Tel 203 484 7161 Fax 203 484 7118