Gamewell-FCI RDF Releasing Device Interface Module

RDF DEVICE INTERFACE RDF Releasing Device Interface Module provides a single hazard 1.0 amp 24 VDC releasing output an FCI FC 72 or FC 72 DL series control panel to an solenoid valve In addition a DISCON switch is provided which may be used to allow the to be serviced and or tested without tripping the device The releasing device circuit is supervised open circuits and ground faults yellow LED is included to quickly identify service needs separate from the FCI control while activating the FCI system trouble circuit The also contains a set of dry Form SPDT contacts transfer upon release RDF modules may be used to provide more than releasing circuit within a common enclosure We rec the addition of APS 6 auxiliary power supplies for RDF modules RDF is UL Listed for use with any UL Listed compat release solenoid max 1 per circuit rated 11W 24 or less UL testing has determined that the Skinner LV2LBX25 solenoid valve is compatible RDF module occupies the equivalent of two zone in the control panel INFORMATION No Powered from FC 72 or FC 72 DL Control Panels DISCONNECT Switch Form Dry Contacts On Release Yellow LED Supervised Transfer Relay voltage current current contacts 1 2 W x 6 H 13.97 x 15.24 cm VDC 20.4 VDC min amp DC amp DC Does not include solenoid amp 26 VDC resistive RDF module is approved by Factory Mutual Research for use with solenoids in Factory Mutual Solenoid A and B which include the following Model LV2LBX25 24 VDC 1 2 inch 1.27 cm NPS 1 2 inch 1.27 cm orifice Model R8210A107 T8210A107 or 8210A107 24 VDC 1 2 inch 1.27 cm NPS 3 8 inch cm orifice are provided for information only and are believed to be accurate However no responsibility is assumed by Fire Control Instruments Inc for their use subject to change without notice 1997 All Rights Reserved 2nd Ave Waltham MA 02451 1133 USA TEL 781 487 0088 FAX 781 370 4132 1.3