Gamewell-FCI SpectrAlert Advance P2H & HR Series Low Frequency Appliances

File Preview
File Preview
Click below to download for free

Text Preview

SpectraAlert Low Frequency and Low Frequency Sounder for Wall Applications Advance Series Complies with UL Standard 464 520 Hz low frequency Listed for ceiling or wall mounting Offers a plug in design with minimal intrusion into the Built with a tamper resistant construction Uses field selectable candela cd settings on the types of wall units 135 cd 177 cd 150 cd 185 cd Provides a low frequency sounder rated at 76 dBA at volts Contains a rotary switch for a low frequency sounder a universal mounting plate for wall units Designed with a mounting plate shorting spring that wiring continuity before the device installation Electrically compatible with the following Legacy SpectrAlert devices MDL3 Sync Module Sounder Sounder SpectrAlert Advance audible visible notification prod are UL 464 Compliant for the 520 Hz low frequency The SpectrAlert Advance Series offer the most ver and easy to use line of low frequency sounder and frequency sounder strobes in the industry With white red plastic housings and Listed for dual wall and ceil mountings the SpectrAlert Advance complies with any requirement The low frequency sounder and strobes are rich with features guaranteed to the installation times and maximize profits the entire SpectrAlert Advance product line the wall low frequency sounder and the low frequency strobes include a variety of features that increase application versatility while simplifying the installation devices feature plug in designs with minimal intrusion the backbox making installations fast and foolproof eliminating costly and time consuming ground faults simplify the installation and protect the devices from damage SpectrAlert Advance uses a univer mounting plate with an on board shorting spring This allows installers to test wiring continuity before the is installed can easily adapt devices to suit a wide range of requirements using the field selectable candela automatic selection of 12 or 24 volt operation a rotary switch for low frequency sounder tones Advance Specifications Specifications SpectrAlert Advance low frequency sounder and low sounder strobes shall mount to a standard 4 x x 1 1 2 10.16 x 10.16 x 3.81 cm backbox 4 10.16 cm octa backbox or double gang backbox Two wire products also mount to a single gang 2 x 4 x 17 8 5.08 x 10.16 5.39 cm backbox A universal mounting plate shall be used mounting products The notification appliance circuit shall terminate at the universal mounting plate Frequency Sounder low frequency sounder shall be a System Sensor Advance Model Listed to UL 464 and shall be for fire protective service The low frequency and the Sync MDL3 Module accessory if shall be powered from a notification appliance circuit and shall operate on a nominal 12 or 24 volts fire alarm panels with built in sync is a registered trademark of Honeywell International Inc is a trademark of System Sensor Inc is a registered trademark of Underwriter Laboratories Inc GAMEWELL FCI are for information only are not intended for installation purposes and are subject to change without notice No responsibility is assumed by Gamewell FCI for their use Clintonville Road Northford CT 06472 1610 USA Tel 203 484 7161 Fax 203 484 7118 by Honeywell International Inc All rights reserved www gamewell fci com Rev B page 1 of 4 Specifications to 120 0 to 49 to 93 non condensing flash per second Operating Range Flash Rate Voltage Low Sounder Voltage Range Frequency Sounder Regulated 12 VDC FWR1 Voltage Range 8 to 17.5 V 12 V nominal or 12VDC FWR or 24 DC FWR1 Voltage Range Sync Module Terminal Wire Dimensions lens Dimensions Frequency Sounder with Surface Back Box SBBW Frequency Sounder Surface Mount Back Dimensions SBBW to 33 V 24 V nominal to 17.5 V 12 V nominal or to 33 V 24 V nominal to 18 AWG x 4.7 W x 2.5 D mm L x 119 mm W x 64 mm D L 4.7 W 1.3 D mm L 119 mm W 33 mm D x 4.7 W x 4.3 D mm L x 120 mm W x 108 mm D x 4.8 W x 3 D mm L x 120 mm W x 76 mm D Full Wave Rectified FWR voltage is a non regulated power source that is used on some supply and panel outputs Frequency Sounder Continued it is used with the Sync Module MDL3 12 rated notification appliance circuit outputs shall operate 8.5 and 17.5 volts 24 volt rated notification appli circuit outputs shall operate between 16.5 to 33 volts the notification appliances are not UL 9th Edition Listed the corresponding panel or power supply being used refer to the compatibility listing of the panel to deter the maximum devices on a circuit The low frequency has an option to switch between temporal three non temporal continuous pattern and coded sup The low frequency sounder shall operate on a coded or power supply SpectrAlert Advance products when used with the Module accessory shall be powered from a notification appliance circuit output and shall on a nominal 12 or 24 volts When used with the Module 12 volt rated notification appliance outputs shall operate between 8.5 and 17.5 volts notification appliance circuit outputs shall between 16.5 and 33 volts Indoor SpectrAlert products shall operate between 32 and 120 Fahrenheit from a regulated DC or full wave recti unfiltered power supply Low Frequency Sounder shall have field selectable candela settings includ 135 150 177 and 185 Frequency Sounder Strobe Combination low frequency sounder strobe shall be a System Sen SpectrAlert Advance Model Listed to UL 1971 and UL and shall be approved for fire protective service The frequency sounder strobe shall be wired as a primary notification appliance and comply with the Ameri with Disabilities Act requirements for visible signaling flashing at 1 Hz over the strobe entire operat voltage range The strobe light shall consist of a xenon tube and associated lens reflector system The shall have an option to switch between a temporal pattern and a non temporal continuous pattern options are set by a multiple position switch The frequency sounder on low frequency sounder strobe shall operate on a non coded power supply Module module shall be a System Sensor Sync Circuit model Listed to UL Standard 464 and shall be approved for protective service The module shall synchronize Spec strobes at 1 Hz and low frequency sounder at tem three Also while operating the strobes the module silence the low frequency sounder on low frequency strobe models over a single pair of wires The shall mount to a 4 11 16 x 4 11 16 x 2 1 8 11.90 x x 5.39 cm backbox The module shall also control 2 Y Class B circuits or 1 Style Z Class A circuit module shall synchronize multiple zones Daisy chain two or more synchronization modules together will syn all the zones they control The module shall not on a coded power supply Rev B page 2 of 4 Clintonville Road Northford CT 06472 1610 USA Tel 203 484 7161 Fax 203 484 7118 Current Draw Data Max Strobe Current Draw mA RMS Candela Range Volts Volts

Related Files