Gamewell-FCI ZDM-D Duel Density Zone Detection Module

FC 72 SERIES DENSITY DETECTION MODULE Two 2 Class B Style B or one 1 A Style D and one 1 Class B Circuit Supervised Red Alarm Indicator Zone Yellow Trouble Indicator Per Zone Output for Supervised Remote LED Incandescent Lamp Annunciator Coded or Non coded Operation May be used with Waterflow Devices Accepts FCI Model PSD CPD 301 SBS Smoke Detectors ZDM D is a Dual Density Zone Module which two Class B Style B or one Class A Style D and Class B initiating circuit A model VEOL end of line is required with Class A wiring module will accommodate FCI model PSD CPD 301 SBS two wire smoke detectors The number of two wire which can be accommodated per zone varies with control panel Consult the panel instruction manual to the capacity Do not mix model 301 SBS detectors CPD PSD series detectors in the same circuit ZDM D mounts in the same panel space as the ZDM and provides output for a supervised remote LED or lamp annunciator using No 1820 or 1829 amp module current current amp zone amp zone with annunciator amp zone with lamp annunciator amp zone with lamp annunciator ohms zone use VEOL for Class A amp zone line resistance output current this is exceeded use ZDM SRB 6 or RB 6 handle additional power requirements 33 42 Jumper Output A output B output alarm output to both zones bus or other jumper bus installed in INSTRUCTIONS 1 BMFC 6 2 BMFC 6 3 5 7 etc ZMC 4 6 8 etc ZMC JRA CR47 Install J31 J33 JRB CR48 Install J32 J34 JRA CR20 Install J11A J33 JRB CR21 Install J11B J34 2nd Ave Waltham MA 02451 1133 USA TEL 781 487 0088 FAX 781 370 4132 1.3 CONTROL INSTRUMENTS Inc INFORMATION No Model ZDM D VEOL Density Zone Detection Module End Of Line Resistor Assembly are provided for information only and are believed to be accurate However no responsibility is assumed by Fire Control Instruments Inc for their use subject to change without notice 1997 All Rights Reserved of 2