Gamewell-FCI ZDM Zone Detector Module

DESCRIPTION ZDM Zone Detection Module mounts in the BMFC ZMC modules in the FC 72 control It accepts one Class Style D or Class B Style B initiating circuit and expands zone capacity of the system It provides supervised output for both LED and incandescent lamp and also furnishes a set of Form dry alarm contacts With Class A wiring depending on of detectors involved a model VEOL end of line may be required module will accommodate FCI Model 301 SBS CPD PSD series two wire smoke detectors The number of detectors which can be accommodated per zone with the control panel Consult the control panel manual to determine the capacity Do not mix detectors with SBS 301 detectors in the same current current contacts line res amp amp amp w LED remote annunc amp w 1829 incandescent annunciator amp w 1820 incandescent annunciator 2 amp 26VDC ohms When using model 301 or SBS smoke detectors in B configuration with 3.3K EOL resistor ONLY resistance is 750 ohms max SERIES DETECTOR Accepts either Class A Style D or B Style B Initiating Circuits Supervised Red Alarm Indicator Yellow Zone Trouble Indicator SPDT Zone Alarm Dry Contacts Coded or Non coded Operation Will Operate U L Listed FCI Model PSD 301 or SBS Two wire Detectors May be used with Waterflow or Supervisory Devices MAINTENANCE Switch Supervised Annunciator Output LED or Incandescent Lamp 1820 or 1829 lamps are provided for information only and are believed to be accurate However no responsibility is assumed by Fire Control Instruments Inc for their use subject to change without notice 1997 All Rights Reserved 2nd Ave Waltham MA 02451 1133 USA TEL 781 487 0088 FAX 781 370 4132 1.3