Hochiki D1300 Series

D1300 Series RS 485 2 wire Data Transceivers Features Meets EIA RS 485 Specifications Tested and Certified by an Independent Testing for Full Compliance with the Environmental Ambient Operating Temperature Shock Vibration Humidity with Condensation Voltage Conditions and Transient Protection of NEMA TS 1 TS 2 and the Caltrans for Traffic Signal Control Equipment Automatic Resettable Solid State Current Limiters Power Transmit and Receive Data Status LED Indicators No In field Electrical or Optical Adjustments Required Data rates up to 400 kbps NRZ Data Re clocking Transparent to Data Encoding Compatible with Data Protocols Point to Point Network Architecture 2 Wire Half Duplex True Tri State Output Hot Swappable Rack Modules Distances up to 20 Miles 33 km Comprehensive Lifetime Warranty IFS D1300 series data transceivers provide point to transmission of half duplex 2 wire EIA RS 485 data signals over one or two optical fibers The are transparent to data encoding allowing for compatibility When used as a line terminating these modules are also compatible with the IFS series drop and repeat data transceivers Models this series are available for use with multimode or single mode optical fiber Plug and play design ensures of installation requiring no electrical or optical adjustments Each transceiver incorporates power and data status indicating LED for monitoring system operation The modules are available in stand alone or rack mount versions Examples Access Control Systems Building Automation and Environmental Control Systems Computer Data Equipment Fire Alarm Systems ITS Traffic Signalization Networks 2 wire Transceivers implementing point to point of half duplex 2 wire RS 485 tri state data signals one or two optical fibers America 888 GE SECURITY 888 437 3287 503 691 7566 sales ifs com 852 2907 8108 852 2142 5063 and New Zealand 613 9239 1200 613 9239 1299 44 113 238 1668 44 113 253 8121 America 305 593 4301 305 593 4300 subject to without notice 2008 General Electric Company Rights Reserved Interface Rate Network Pulse Distortion Option Data Rate and Power Mount of Rack Slots Protection Board in cm LxWxH Mount Mount Weight Temp Temp Humidity 2 wire 150 Kbps 400 Kbps and D1300WDMB 850 nm Multimode others 1310 nm Multimode or Single Mode Block with Screw Clamps VDC 200 mA to 24 VDC 100 mA Rack Resettable Solid State Current Limiters IPC Standard x 4.9 x 1.0 in 17.8 x 12.5 x 2.5 cm x 4.9 x 1.0 in 17.8 x 12.5 x 2.5 cm 2 lbs 0.9 kg 100,000 hours C to 74 C C to 85 C to 95 non condensing be extended to condensation conditions by adding suffix to number for conformal coating compliance Design to 1.9 miles km International International Fibers MM in the USA with FDA Performance for Laser Products Title 21 of Federal Regulations Subchapter J Information Data Transceiver 850 nm Data Transceiver 850 nm Data Transceiver 1310 nm Data Transceiver 1310 nm Transceiver 1310 nm Mode 12 Volt DC Plug in Power Supply Included 12 Volt DC Plug in Power Supply 230 VAC Input Included if specified at time of order for 24 VDC Power Extra charge consult factory to Model Number for R3 Rack Mount No Charge Requires R3 Rack purchased separately for Conformally Coated Printed Circuit Boards Extra charge consult factory for High Speed Data Rates up to 400 Kbps Extra charge consult factory transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors splices and patch panels can also be limited by fiber bandwidth For 50 125 Fiber subtract 4 dB from Optical Power Budget accessories are third party manufactured dB dB dB dB dB miles 3 km miles 3 km miles 3 km miles 10 km miles 33 km