Invensys MN-CIM_f-26720-4

TAC I/A Series Sensors and mN-SdK Sensors are a family of microprocessor- digital room temperature sensors used with MicroNet 2000 Controllers. Available in two MicroNet Sensors include industry standard for accurate room sensing and plug-in jacks for the MicroNet Controller software. These MicroNet Sensors are for use with the MN-FLO-700 and MN- stand-alone MicroNet VAV Controllers. the digital wall sensor, the operator can monitor performance of the product, edit operational and even reprogram the controller, if provided the proper password level. Up to two sensors be connected to a MicroNet 2000 Controller. Sensors are suitable for direct-wall, 2 x 4 box, 1/4 DIN electrical box, or surface box MicroNet Sensor connected to a MicroNet Controller is considered a stand-alone digital control component. The MicroNet measures room conditions and relays information to the controller via the U-Link digital wall sensor is durable, and offers easy as well as a wide variety of interface for the user. The MicroNet Controller Module plugs into the communication on the sensor to provide a user interface to the via the MicroNet Controller Interface. The Controller Interface software may be utilized set up and monitor a MicroNet Controller. range span varies with the controller to 320 ( to 160 to 9,990 CFM. Larger values can be monitored and via the MicroNet Controller interface. on next page. H x 3-1/4 W x 15/16 D in. x 83 x 24 mm). to NEMA-1 Requirements. Immunity Compliance 801.5 and ANSI C62.41 (IEEE-587, Category A B). Compliance 801.4. discharge Compliance 801.2. LISTINgS A. # E71385 Category PAZX). #LR 3728). LImITS Temperature to 122 (0 to 50 and Storage Temperature to 160 ( to 71 to 95% RH, non-condensing. TErmINALS terminals to 24 AWG. I/A Series MN-FLO3T-700 continued from first page. Levels (mN-SdK only) access levels for monitoring, operating, and functions with automatic time-out feature. display (mN-SdK only) field configurable sensor displays. of displayed values. minimum/maximum limit setpoint values. driven, automatically configured, display/command values. mN-SdK dISPLAy/CHANgE VALUES Temperature Setpoint Setpoint (Heating/Cooling) low-profile packaging. zone temperature indication (selectable 0.1 1 degree display of or temperature sensors provide without recalibration. compensating temperature conversions the need to calibrate over time. virtually any wiring type including pairs without termination resistors. selected values such as setpoints, mode, and actual air flow. Configurable intuitive display screens that are retained, even if the MicroNet is replaced. only Liquid Crystal Display U-Link 2-wire connection that provides power and interface to the MicroNet Sensor. ft. (61 m) between controller and controlled or peripherals. 400 ft. (122 m) total distance all wire segments. Communication Jack receptacle for MicroNet Controller Interface (MN-CIM) for user access to the MicroNet Controller via the MicroNet Controller Interface Electric 1354 Clifford Avenue, P.O. Box 2940, Loves Park, IL 61132-2940, USA 1-888-444-1311 www.schneider-electric.com/buildings 2010 tl