Home » Invensys MPC-2PO Multi-Purpose Pneumatic Output Module
File preview
Click the button below to download immediately for free
Show text preview
MPC-2P0 Controller Output Module U.S.A. OF CONTENTS GUIDELINES THIS PACKAGE COMPONENTS REQUIREMENTS AND SETUP INFORMATION Outputs SCALE and OFSET Using MOCALC LEDs …………………………………………… pneumatic output module (MPC-2PO) an module that plugs directly into any of four option slots available on the MicroSmart controller (MSC-MPC), providing output capability to the MSC-MPC. for use in packaged-unit control and HVAC applications, the MPC-2P0 two pneumatic outputs to directly drive damper and valve actuators in building systems. NO.: MPC-2P0. LISTINGS: UL-W 6 (Energy Equipment), UL-873 . Indicating and Regulatlng pending. UL-664 (Smoke Control Sub-assembly). Complies with FCC ass requirements. as a smoke control system sub-assembly. to be used by itself or as part of a MicroSmart Network (RCM/NCM) in a smoke control For smokecontrol applications, install accordance with F-25645, Smoke Systems Manual. TWO 3-15 psig pneumatic output 8 SCFH @ 15 psig. CONSUMPTION: Application-dependent. not a constant-bleed device. AIR: 30 psig maximum. 2 0.05 psi. FILTRATION: 25-micron ENVIRONMENT: 32 to 122 F to 50 C), 5-65% RH (not+condensing). REQUIREMENTS: MPC-2P0 derives operating power from associated MSGMPC. 5 x 6.25 Net: 12 1/2 oz. 13 oz. GUIDELINES equipment has been tested and found to with the limits for a Class digital pursuant to Part 15 of the FCC rules. limits are designed to provide reasonable against harmful interferente when the is operated in a commercial This equipment generates, uses can radiate radio frequency energy and, if not and used in accordance with the manual may cause harmful to radio communications. of this equipment in a residential area likely to cause harmful interferente the user will be required to correct the at his own expense. which Guidelines TO CONTROLLER r 0 WITTxB~C$PL INSTALLING THE MPG2P0, BE SURE THAT THE CONTROLLER FULLY SEATED TO THE BACKPLATE BEFORE AND AFTER THE IS FASTENED TO THE ENCLOSURE. MPC-2P0 Output Module 1 Installation Guidelines reduce risk of fire or electrical shock, install in controlled environment relatively free of inspect the unit for any beginning the installation process for the defects and to make sure all parts are any flaws are detected, contact your local Siebe or authorized represbntative immediately. information is contained in this For further details regarding software please refer to the appropriate Guide and the
MPC-2P0 Controller Output Module U.S.A. OF CONTENTS GUIDELINES THIS PACKAGE COMPONENTS REQUIREMENTS AND SETUP INFORMATION Outputs SCALE and OFSET Using MOCALC LEDs …………………………………………… pneumatic output module (MPC-2PO) an module that plugs directly into any of four option slots available on the MicroSmart controller (MSC-MPC), providing output capability to the MSC-MPC. for use in packaged-unit control and HVAC applications, the MPC-2P0 two pneumatic outputs to directly drive damper and valve actuators in building systems. NO.: MPC-2P0. LISTINGS: UL-W 6 (Energy Equipment), UL-873 . Indicating and Regulatlng pending. UL-664 (Smoke Control Sub-assembly). Complies with FCC ass requirements. as a smoke control system sub-assembly. to be used by itself or as part of a MicroSmart Network (RCM/NCM) in a smoke control For smokecontrol applications, install accordance with F-25645, Smoke Systems Manual. TWO 3-15 psig pneumatic output 8 SCFH @ 15 psig. CONSUMPTION: Application-dependent. not a constant-bleed device. AIR: 30 psig maximum. 2 0.05 psi. FILTRATION: 25-micron ENVIRONMENT: 32 to 122 F to 50 C), 5-65% RH (not+condensing). REQUIREMENTS: MPC-2P0 derives operating power from associated MSGMPC. 5 x 6.25 Net: 12 1/2 oz. 13 oz. GUIDELINES equipment has been tested and found to with the limits for a Class digital pursuant to Part 15 of the FCC rules. limits are designed to provide reasonable against harmful interferente when the is operated in a commercial This equipment generates, uses can radiate radio frequency energy and, if not and used in accordance with the manual may cause harmful to radio communications. of this equipment in a residential area likely to cause harmful interferente the user will be required to correct the at his own expense. which Guidelines TO CONTROLLER r 0 WITTxB~C$PL INSTALLING THE MPG2P0, BE SURE THAT THE CONTROLLER FULLY SEATED TO THE BACKPLATE BEFORE AND AFTER THE IS FASTENED TO THE ENCLOSURE. MPC-2P0 Output Module 1 Installation Guidelines reduce risk of fire or electrical shock, install in controlled environment relatively free of inspect the unit for any beginning the installation process for the defects and to make sure all parts are any flaws are detected, contact your local Siebe or authorized represbntative immediately. information is contained in this For further details regarding software please refer to the appropriate Guide and the