Invensys MN-CIM f-26720-4

TAC I A Series Sensors and mN SdK Sensors are a family of microprocessor digital room temperature sensors used with MicroNet 2000 Controllers Available in two MicroNet Sensors include industry standard for accurate room sensing and plug in jacks for the MicroNet Controller software These MicroNet Sensors are for use with the MN FLO 700 and MN stand alone MicroNet VAV Controllers the digital wall sensor the operator can monitor performance of the product edit operational and even reprogram the controller if provided the proper password level Up to two sensors be connected to a MicroNet 2000 Controller Sensors are suitable for direct wall 2 x 4 box 1 4 DIN electrical box or surface box MicroNet Sensor connected to a MicroNet Controller is considered a stand alone digital control component The MicroNet measures room conditions and relays information to the controller via the U Link digital wall sensor is durable and offers easy as well as a wide variety of interface for the user The MicroNet Controller Module plugs into the communication on the sensor to provide a user interface to the via the MicroNet Controller Interface The Controller Interface software may be utilized set up and monitor a MicroNet Controller range span varies with the controller to 320 to 160 to 9,990 CFM Larger values can be monitored and via the MicroNet Controller interface on next page H x 3 1 4 W x 15 16 D in x 83 x 24 mm to NEMA 1 Requirements Immunity Compliance 801.5 and ANSI C62.41 IEEE 587 Category A B Compliance 801.4 discharge Compliance 801.2 LISTINgS A E71385 Category PAZX LR 3728 LImITS Temperature to 122 0 to 50 and Storage Temperature to 160 to 71 to 95 RH non condensing TErmINALS terminals to 24 AWG I A Series MN FLO3T 700 continued from first page Levels mN SdK only access levels for monitoring operating and functions with automatic time out feature display mN SdK only field configurable sensor displays of displayed values minimum maximum limit setpoint values driven automatically configured display command values mN SdK dISPLAy CHANgE VALUES Temperature Setpoint Setpoint Heating Cooling low profile packaging zone temperature indication selectable 0.1 1 degree display of or temperature sensors provide without recalibration compensating temperature conversions the need to calibrate over time virtually any wiring type including pairs without termination resistors selected values such as setpoints mode and actual air flow Configurable intuitive display screens that are retained even if the MicroNet is replaced only Liquid Crystal Display U Link 2 wire connection that provides power and interface to the MicroNet Sensor ft 61 m between controller and controlled or peripherals 400 ft 122 m total distance all wire segments Communication Jack receptacle for MicroNet Controller Interface MN CIM for user access to the MicroNet Controller via the MicroNet Controller Interface Electric 1354 Clifford Avenue P O Box 2940 Loves Park IL 61132 2940 USA 1 888 444 1311 www schneider electric com buildings 2010 tl I A Series MN FLO3T 700 aluminum guard guard guard Covers qty 12 inserts for MN S model qty 25 Number Controller Electric 1354 Clifford Avenue P O Box 2940 Loves Park IL 61132 2940 USA 1 888 444 1311 www schneider electric com buildings 2010 tl I A Series MN FLO3T 700 October 1st 2009 TAC became the Buildings Business of its parent company Schneider Electric This document reflects the visual identity of Schneider Electric however there references to TAC as a corporate brand in the body copy As each document is updated the body copy will be changed to reflect appropriate corporate brand changes brand names trademarks and registered trademarks are the property of their respective owners Information contained within this document is subject to change without notice rights reserved Electric 1354 Clifford Avenue P O Box 2940 Loves Park IL 61132 2940 USA 1 888 444 1311 www schneider electric com buildings 2010 tl